Finally joined the party...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 2, 2006
Threads
78
Messages
308
Location
North Mississippi
Join the party fj40 pic attached in link

Got a Nov 74 FJ40 and am getting ready to dive into the front seals, bearings, etc. Anyone want to give me a "heads-up" on anything? It's leaking gear oil on both sides (slowly)..not real sure what kit to order...was looking at a front axle aussie rebuild kit from CCOT for about $100. Also redoing all the front end brakes, new drums (CCOT $116 for 2 (not enough in 'em to turn)). What's the best thing to use to clean brake t-fittings so I can reuse them...?

North Mississippi Cruiser
 
Last edited:
Welcome to MUD :flipoff2: (official greeting). Congatulations on getting right into things. The only advice I can give is get ready to spend all of your extra $$$$ (and some that are not extra) on the "hobby". I am rebuilding mine from the ground up. Like you, I started with front axle/brakes. Get that done and safe to run, then see what else you want to do. I ran mine for about 2 years, then decided for a full rebuild. Post pics of what you've got.
 
Check the tech section first. It is full of info on drum brakes. As far as a rebuild kit, try cruiseroutfitters.com they had theirs on sale. They have a good product and. my .02, go ahead and buy the wheel bearings while your at it. It's not worth the trouble trying to hunt them down later...
 
Thanks ... tried to post a picture of the LC, but I'm about as knowledgeable on downsizing a pic to 800 x 800 (whatever the @#$ that is suppose to mean)...as I am on cruiser front ends...anyway I look forward to leeching knowledge from you vet's. I already perused the tech forum...got some good info & I'll check out cruiseroutfitters...they seem to be mentioned frequently around here.
 
use brakeclean to clean out your brake fittings and then be sure they're dry before putting everything back together.

you can resize your pics in a paint or photoshop program, or if you email me your pics "nuclearlemon at comcast dot net", i'll size them and post them for you
 
Specter Offroad has a decent complete kit available, seals, bearings, everything... worked for me.

(and everything is on sale this week...)

Cruiseoutfitters has a very good reputation as well...

Welcome. Kiss your finances goodbye!

:D
 
Pic attached...

Hope this pic makes it...very little rust...this is one of those cruisers where the pic looks good, but once you dive into it...the list of fixes, well let's just say I got a winter project on my hands
 
Last edited:
Where is the pic? And I agree go disk especially if you are going to add some meat to the rims.
 
Hi All:

I agree with "Too Tall"; before you spend money on re-building a front drum brake axle spend some quality time in the IH8MUD.com archieves researching front disc brake swaps, in particular the so-called "mini-truck" disc brake conversion.

The front disc brake swap is money and effort well spent, trust me!

Regards,

Alan
 
Thanks Alan...I gotta crawl before I can rock (walk)...I'm going for the big maintenance stretch just changing seals, etc...I saw the post you were refering to...good stuff, maybe one day or maybe one of my boyz will go for it when it's handed over to them.

Wonder if "TOO TALL" has the same fj40 seating dilema as me ...

Got leg room?
 
Welcome to Mud. I got a set of drum that I took off my 74' Planning on going to disks. Don't know if they have enought meat on them but you could have them for hte cost of shipping. Good luck with your project.
 
Welcome to MUD!
We are using Drumbrakes on all the wheels of all our cruisers, so far so good, but we do find ourselves re-fibreing the pads frequently. Nothing like the smell of asbestos in the morning.
As for legroom, I'm 6'3 and in some FJs I fit better than in others, we got 4 of them and they are all different.
 
Welcome to the land of MUD....I'm in the process of aquiring all the items I need to do a disc conversion all the way around! Tired of adjusting drums...I was debating on keeping the drums but.......naa! Anyway good luck...everything you need is here....somewhere!

Brian
 
Back
Top Bottom