Finally brought her home

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 10, 2017
Threads
26
Messages
95
Location
Fayetteville, AR
So I drove across (300 miles) the great state of Arkansas to pick up my 97 LC this weekend. Got home last night. She looks to be in great condition @ 196K miles. PO had that bumper/winch on stock (original I'm sure) springs and shocks. OME 2.5" heavies front/medium rear are on the way. I monitored the coolant temp on the journey home. Never got above 200 and stayed mostly at 194. Only problem I've noticed right off the bat is an oil leak. I noticed about a quarter size spot in my driveway after parking it. Got under the rig to take a look and there's oil sprayed everywhere from the journey. I guess I'll spray it down and try to find the culprit. She's got another 1K miles before an oil change and looks to be about 1/2 quart low. Anyway here are some pics.

LC1.webp


LC2.webp


LC Front Interior.webp
 
Nice! And interior looks great too. Have fun.
 
Pressure wash the engine bay and look for the leaks. You may already know this but likely sources are Distributor Oring, valve cover, oil pump cover and oil level sensor.
 
Pressure wash the engine bay and look for the leaks. You may already know this but likely sources are Distributor Oring, valve cover, oil pump cover and oil level sensor.

Yeah through searching the forum I saw those were common culprits. Can just pressure wash directly or should I cover the electrical stuff with plastic bags?
 
Probably best to cover the distributor and fuse block with plastic bags and avoid spraying them with high pressure water. If it were me, I'd just avoid spraying the top of the engine with high pressure, too many splices, wires, and molex plugs that could be compromised. I like to use a foaming degreaser and medium pressure for the top end. On the bottom of the engine, several rounds of degreaser and high pressure followed by some dirty rag detailing will reveal the source of your oil leak(s).

Great looking truck!
 
Oh and averaged 15.5 mpg on the trip home :)
 
Nice Find!

Interior looks great!

Enjoy yourself, use the Search function often, and open your wallet to affirm the addiction!

Welcome!
:flipoff2::flipoff2::flipoff2:
 
Pressure wash the engine bay and look for the leaks. You may already know this but likely sources are Distributor Oring, valve cover, oil pump cover and oil level sensor.

Most common significant leaks we fix are valve cover and front crank seal, the one where the big nut torqued to 306 #
 
I would also be careful about spraying directly at the head gasket and valve cover gasket. I usually just use Simple Green out of a spray bottle and just use a variety of brushes and then the garden hose sprayer. I cover the electrical stuff and don't shoot at them.

If you are planning on the crank seal, think about how you are going to get the nut torqued back up and have those tools on hand. I am looking at a cheap torque multiplier for the whole job rather than the other options.

Look like a sweet rig though!
 
Beautiful cruiser. Congratulations! Love the color.
 
Back
Top Bottom