Felpro Gaskets?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Hi Whodat....
I asked about Felpro specifically because it was mentioned several times on this board that the Felpro gaskets work very well at sealing up headers on the FJ40.

I know nothing about gaskets and whether they are good or bad, but I don't want to do this job twice. Ya know....

 
Advance Auto parts doesn't have it online....or I can't find it online.

I went ahead and ordered Manafre's gasket instead. I ordered two...just in case.

I've heard that you can/should use two gaskets here to lessen the chance of a warp causing a leak. I may also use some sort of sealant..but not sure which kind. Any ideas?
 
CSK sells Felpro unless you ask for something different.

Best intake/exhaust gasket I've found for the F series engines.


Mark...
 
Thanks Mark,
Is the part number MS22813? I have the MAF 6 to 1 headers and just want to make sure that this is compatible...

Thanks again for all the help everyone.
 
2 second search....Straight for Jim C in my thread about the same question

"Yes, use the FelPro MS22813, available from your local Advance for $13.99. It's made of some yummy graphite/mica/asbestos/unbreakium mixture that is way better than the OEM foil crap."
 
Herb said:
Thanks Mark,
Is the part number MS22813? I have the MAF 6 to 1 headers and just want to make sure that this is compatible...
Part numbers? We don need no stinkin part numbers. ;)

I just pick up the phone and say "Hi Tim, it's Mark. I need an intake/exhaust gasket. Yep, Cruiser as usual. In stock? Cool. Have Paul drop it off when he brings me the Ujoints that came in this morning."

It's the parts guy's job to remember the part numbers. ;)


Mark...
 
I guess I'll gain that kind of rapport with my parts guy soon enough. Since I don't yet, I do have one last question for the group....

The MAF filter has distinct individual holes for each exhaust port, the felpro has bigger holes that accomodate two exhaust ports per hole. Does this matter at all??
 
Yep. THanks. I didn't re-check that thread this morning. I'll go with the MAF ones that I have already ordered.

Thanks to all for the help.
 
Back
Top Bottom