My family is growing and I am starting to look into the ford excursion for our family adventures. So. This rig Will need to go to finance it. I would rather trade straight for an excursion but willing to entertain offers as well.
205k on the clock, HG done at 150.
Elocker axles rebuilt front and rear.
NEW OEM 80 series AISIN manual hubs
OEM 80 series PART TIME transfer case
All beds sides and tailgate are removable
OME 850j/863j springs with 1 inch spacers
NEW OME L shocks
Slee caster correction
NEW ARB rear upper/lower control arms and pan hard rods
NEW front rotors/pads/rebuilt calipers
NEWish TJM bull bar with winch plate
NEW TJM side steps and fender bars that match the bumper (not pictured)
NEW OEM fj40 tail lights completely and professionally wired in. They look and work Very well.
NEW Cooper ST MAXX 315/75r16 x 5.
New OEM rear main seal
New OEM engine wiring harness (old one damaged while installing OEM valve cover gasket)
All new OEM engine hoses to include new OEM air intake hose
New Denso O2 sensors installed and high clearance exhaust pipe
She really just needs paint to be finished! If purchased I can set you up with someone local to me that can do a very good paint job for reasonable prices. If I paint it, it will be original white
I Have some other parts that might be able to come with it like the matching TJM fender guards and steps, OEM winch etc. 303- five two six 8411
View attachment 1277455
View attachment 1277456
View attachment 1277457
205k on the clock, HG done at 150.
Elocker axles rebuilt front and rear.
NEW OEM 80 series AISIN manual hubs
OEM 80 series PART TIME transfer case
All beds sides and tailgate are removable
OME 850j/863j springs with 1 inch spacers
NEW OME L shocks
Slee caster correction
NEW ARB rear upper/lower control arms and pan hard rods
NEW front rotors/pads/rebuilt calipers
NEWish TJM bull bar with winch plate
NEW TJM side steps and fender bars that match the bumper (not pictured)
NEW OEM fj40 tail lights completely and professionally wired in. They look and work Very well.
NEW Cooper ST MAXX 315/75r16 x 5.
New OEM rear main seal
New OEM engine wiring harness (old one damaged while installing OEM valve cover gasket)
All new OEM engine hoses to include new OEM air intake hose
New Denso O2 sensors installed and high clearance exhaust pipe
She really just needs paint to be finished! If purchased I can set you up with someone local to me that can do a very good paint job for reasonable prices. If I paint it, it will be original white
I Have some other parts that might be able to come with it like the matching TJM fender guards and steps, OEM winch etc. 303- five two six 8411
View attachment 1277455
View attachment 1277456
View attachment 1277457
Last edited:
