Engine knock video/audio

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

What kind of drawback could I have from different weight oils? I am sure there are people here who would spin on their eyebrows not using spec oils. I know this is a whoooole different topic. I will search threads on that one.
Thicker oil usually for hotter climates. Overseas I believe these engines call for 20-50 but don't recommend that here due to the EPA crap.
 
Good to know thanks. Never thought about going OEM on a filter for some reason. I guess I have never really heard of any stories about "my engine failed because of X filter/oil." And I won't use synthetic. Otherwise I would gono with RP. I only used to really pay attention to oil when I had diesels. Rotella all the way. I have not settled on any oil filter combo...
:worms:
If you're using a WIX oil filter read this
If you haven't already read it's worth the time
Oil Recommendations and Discussion Thread for FAQ
 
OK, so I hate seeing posts that kind of fade away without answers. I just wanted to follow up since I just now got around to finishing up some work. I got the new stud in the water pump. Easy as it could get although any advice on tightening the stud would be welcome. I could only go so far with the double nut before it seated and therefore I never really felt it got tight enough. This time though I bought a digital torque adapter and feel better about what I got on the nut. As for the slap and noise, I got two matched OEM belts, and a tension tester. Knocked that noise right out. Right now, I am leak free and noise free.
 
What kind of drawback could I have from different weight oils? I am sure there are people here who would spin on their eyebrows not using spec oils. I know this is a whoooole different topic. I will search threads on that one.
I'm currently using Amsoil AMO 10w40 (high zinc ) black cap with their 15k oil filter. It runs very smooth. It's a little expensive but, in my experience it's worth it. I live in Camp Pendleton, CA.
 
That video sounds very similar to my 80 but its I only really audible at low idle speeds and only part of the time.
Like - slap slap clap -skip- clap clap slap -skip- slap clap etc. I could hear it within the clatter you are getting. Dont know what it is though.
 
I was really surprised to find it was the crappy belts. As for OEM, yeah, at first I was going to go all OEM, but I have since figured that there are plenty of things that are better, much better than stock. But if I don't know better, I just get stock for now.
 
I was really surprised to find it was the crappy belts. As for OEM, yeah, at first I was going to go all OEM, but I have since figured that there are plenty of things that are better, much better than stock. But if I don't know better, I just get stock for now.
In reality, there's very little better than OEM for these rigs.
 
That sounded exactly a problem with the belts... I have a 1HD-T that had the same noise, I replaced the belts and greased the tensioner (inside) and it have been running quiet for more than a year.
I replaced my belts with some after market ones made on the US, just don't go cheap or Chinese and you will be alright.
 
This could open up a whole new :worms:but there is definitely something I noticed when I changed out my mismatched, cogged belts. Not only was there an obvious change in the way the engine sounded, the new belts were a great deal shorter than the aftermarket crap. I realized when I changed them that I had to spend about 10-15 freaking minutes reducing the angle on the alternator tensioner bolt to get the belts to fit. Whoever put these belts on just tried to get reasonably close to the right size, but they were a good bit bigger than spec. I wonder if that could have possibly had anything to do with the wear on the water pump, and what all the extra vibration might have done to my alternator. Nice thing about going to OEM, at least in this case, was to know what and where everything was supposed to be.
 
Back
Top Bottom