Engine Help high compression but need rebuild?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Don't know where the OP is located... In Vegas, I paid a mchanic $900 to have the 2F pulled, stripped to a longblock and redressed and reinstalled, after the rebuild... And an old school machine shop $2850 for the rebuild... Total $3750... New cam, new valves, rods and Pistons... Cylinders bored .025 over, crank turned deck milled, etc.

Find an old school machine shop, that's been in business for decades... Preferably 35+ years and ask if they have ever rebuilt a 2F... Ask for an estimate.

I can recommend a great machine shop in Las Vegas... And a great old school mechanic.
Who would you recommend in Vegas for a 2f rebuild?
 
Who would you recommend in Vegas for a 2f rebuild?
If it was me, I'd talk to Fultz's Machine Shop on West Bonanza, down near the Spaghetti Bowl (Interstate 15 and US 95 interchange).

I imagine Kurt @cruiseroutfit would be able to recommend a machine shop in your area, if there is a good one up there.
 
Last edited:
Who would you recommend in Vegas for a 2f rebuild?

I would have recommended Dan Fulz, as @4Cruisers suggested, above.

Unfortunately, Dan closed his shop and retired a few months ago... after about 40 years.

I’m not familiar with another good FJ40 mechanic in the Vegas area.

As suggested, Kurt can probably help... or, you could ask @woody if he can recommend someone around St George.

Otherwise, @Georg in Stockton, CA or @65swb45 IN Burbank, CA.

Good luck!!

BTW It’s really hard to believe you had a good compression test. IIRC New 2F compression was 150. I doubt you would see 150-160 if your top end (rings) are suspect.

You can “borrow” a decent Compression Test Kit from most auto parts. I would borrow one , if you don’t own one, and do your own tests (dry then wet) and report back to this thread.

Maybe, we can put you on the right track and save you some money.

Edit:

Good info in this thread —> 2F compression

Instructions in this thread —> Compression test 2f confused
 
Last edited:
In StG, Pro Auto Care... but they have been struggling to find a good local machine shop lately for head work. Worth a call.

@fj55-100
 
I would have recommended Dan Fulz, as @4Cruisers suggested, above.
Unfortunately, Dan closed his shop and retired a few months ago... after about 40 years.
I’m not familiar with another good FJ40 mechanic in the Vegas area.

Dang that is sad to hear, Fultz's Machine Shop was always my go to machine shop. They did great work. Time to be on the look for a new reliable shop.
JP
 
Dang that is sad to hear, Fultz's Machine Shop was always my go to machine shop. They did great work. Time to be on the look for a new reliable shop.
JP

Yep, Dan’s a great guy!!

I looked up the machine shop after the message, “number no longer active” and it said “closed permanently”.

So I called Don Williams, who raced with Dan for decades, and made sure Dan was healthy... he just decided it was time to quit working.

Big loss for those in need of a great machine shop, but I wish Dan all the best.

Please let everyone know if you find a good shop. I’ll do the same.
 
Back
Top Bottom