Engine Code 25 and 26 trouble

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 19, 2018
Threads
1
Messages
1
Location
SoCAL
Hey all I have a 92' w/ 248k miles 80 series and I've replaced several parts that i'll list and im still getting the 25&26 ( too lean & too rich ) codes. I've been on several threads and have followed them but im still having the issue. I've also searched for vac leaks and no go.

items replaced

-plugs ,wires , cap & rotor

-Air Flow meter

-cleaned egr and tested it

-replaced the o2 sensors

-replaced pcv

-air filter

- I used that injector cleaner as well maybe I should pull them out and clean them individually sounds like a weekend project.


well these are the latest replacements anything im missing that may contribute to the codes please chime in have a great weekend.
 
Cracks in the intake tube between the air flow sensor and the throttle body?

What brand O2 sensor did you use? There has been some history of off brand O2 sensors not working well with the ECM.

When it comes to cleaning injectors, I'm pretty sure you need to have an injector shop do it. They hook them to a machine and cycle the injector with cleaning fluid flowing through it. They also measure how much flow the injector is spraying along with the pattern, and can tell if it is weak or has a mechanical problem.
 
Last edited:
Back
Top Bottom