ELECTRIC ISSUES WIREHARNESS / HEADLIGHT SWITCH

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 22, 2019
Threads
15
Messages
87
Location
COLLEGE STATION, TX
After posting on the wiring harness, decided to chase shorts first. 1st issue- head lights come on 1st and 2nd, no running lights. brakes, turn and hazard do not function with headlights on (either position). Turn head lights off, break, turn hazard work. Is it the head light switch? where might I find one?
 
Experiment with headlight switch to determine which terminals to connect to for parking and headlights. Make sure various light fixtures have good ground.
 
Did you do the jiggle test?

Turn lights on and jiggle the switch. Look for flickering lights. Do the same with the turn signal switch(arm).
 
No flicker
 
I would pull the switch and check the internals next.
 
so no ideas on where to get a new switch, or will a different year fit?
 
@beno

@RAGINGMATT

 
Just about any headlight switch can be made to work with the right adapter. I make these, look on my web site.
Post a pic of your switch.
One of three things is wrong...
1st : Switch is plugged in backwards. Yes it can be done. The switch is "keyed" ie it has one terminal that has an odd L shape to it to fit into the corresponding cavity on the connector plug. You can force it into the other position resulting in odd behavior.
2nd: It is the wrong switch for a 1974.
3rd: Someone may have tried to fix it and put it back together wrong. The switch needs to be taken apart, cleaned, re-greased and put back together correctly.
 
Back
Top Bottom