EGR VSV mod questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 26, 2020
Threads
12
Messages
22
Location
Mississippi
Newbie FJ80 owner here. I've got a 1995 model. I've got the egr fault.code on my 80. After doing some research on this topic I found some.have had success with Dorman PN 911-850 modification.

This is my question. How exactly do you route this modification? I understand about disconnecting the sensor and connecting to the Dorman. My question is regarding the routing of the vacuum lines

Any input or suggestions greatly appreciated!!
 
After dealing with this issue the right (or maybe it was the wrong) way on my first 80. When I threw the code in my current 80 I literally unplugged everything by feel under the intake plenum and plugged the new one in and zip tied it to the side support. I wasn’t trying to mess with all that crap again.
 
How exactly do you route this modification? I understand about disconnecting the sensor and connecting to the Dorman. My question is regarding the routing of the vacuum lines
If you're talking about the modification which leaves the old VSV in place, the new VSV is plumbed in series with the old one.
 
Back
Top Bottom