dual stabilizers. Anyone Doing this

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

My opinion is that they aren't steering stabilizers, they are steering dampeners. Their purpose is to slow down the motion of the tie rod so that you don't sprain your wrist when you hit a rock. Without them the steering wheel can whip around violently when you put a tire up against a rock. One should be enough, but maybe two with tires over 44".
 
Poser said:
I thought that they were installed to control bump-steer....

I always thought bump steer is the change in left to right direction that is caused by a drag link that is angled and not horizontal. As the springs compress, the truck steers to the right as the drag link effectively lengthens.

The closer the drag link is to horizontal and the longer it is, the less of an effect of spring compression.
 
try driving a pot holed gravel logging road with no steering stabilizer. they are there to dampen. the original question was do people do dual set ups? l see them on big fords etc. but they are running huge tires. So I agree for big tires. Maybe forty an up.

why do you have shocks? to dampen out the bounce right? same theory with the steering, but for the road conditions not worn out parts.
 
Back
Top Bottom