Doors keep unlocking

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 21, 2006
Threads
81
Messages
584
Location
Olympia Wa
Here recently I have noticed that when going to unlock the cruiser with the remote the lights only flash once and it is locked. I have been locking it with the remote and it seems to unlock itself when it wants. I have tried to lock it with just the inside switch but havent done it enough to see if it unlocks then. Anyone else have or has had this problem? I take it, it is probably in the box under the drivers seat?? My rig also has some other wiring issues like the rear wiper inop most of the time and 3rd brake lamp inop. The rear doors also when open dont trigger the dome light to come on umless you play with the plunger. Also when the lift gate is open the 1st dome light is dim and the 2nd doesnt come on and it make a fant humming noise. I love this cruiser but I dont follow wiring to well. Any help or should I abandon ship?
 
First of all, you should FedEx me the title to that 71 Chevelle to be sure you get accurate and meaningful advice....

I think better with a full garage.

DougM
 
I tell ya what... I may be having that problem as well. Half the time I find my doors unlocked in the morning, and I swear I always lock it.

Also, the friggin driver's power seat somehow adjusts itself during the night. Or else I change into a 5'2'' knome when sleeping.
 
Most of the cars I have listed are for sale except for a few. Unfortunatly I want the 71 chevelle. Along with the charger,bronco, and of course the cruisers. The sti is a fun one to drive as well.
 
Check the pin switches on the doors.

I had this problem, thought I was going nuts, until I realized that it was possible to trigger the lock system by jiggering the pin switch. If the vehicle shook, they'd trigger. If I went around a corner, driving, they'd trigger. I replaced them, and the damn thing quit doing the "weird locking thing".
 
I recently replaced the OEM front door speakers. Before buttoning it all up, I tested the switches (door locks & windows) to make sure I didn't FUBAR anything. To my horror, the locks would automatically unlock, everytime I locked them from the switch.

Come to find out, I had the key in the ignition and as soon as I removed the key all was well. I can only assume that there is some sort of 'dumba#@' sensor to help prevent locking your keys in there.

Point is, there could be something in the ignition switch that is tripping this maybe, another possiblity.

Ross
 
I was having this problem as well. What it ended up being is I was hitting the lock button too quickly after shutting the door. It would still beep once and flash the lights, but the beep was longer and the doors wouldn't lock. It took me forever to figure this out. Now I turned off the beep and make sure I hear the doors lock or just peek thru the window and double check.
 
I have a problem where mine locks if I am standing close with the remote in my pocket. Unlock it with the remote stand near the truck with all the doors closed and it locks itself.
 
With the OEM system, I believe it does not alway lock when you press the button after getting out and walking away, it may have unlocked it (yeah it was already unlocked). I find that it seems to lock/unlock based on the last "state" it was in.

For instance, if you start up the car, and it autolocks, then you drive, park and manually unlock the driver door before turning the vehicle off, the auto unlock feature which normally unlocks your car when the key is turned off, will not work. In this case, the last thing the system remembers, is locking the car (when you first turned the car on). So when you are walking away and press your remote button, it unlocks/disarms, since the car is already "locked" from it's perspective.

Sorry, it is a bit confusing, but I always manually check by lifting a door handle to ensure the vehicle locked, might try double checking each time you arm/lock for a while, and see if you see the same trend.
 
Also when the lift gate is open the 1st dome light is dim and the 2nd doesnt come on and it make a fant humming noise.

Sounds like a poor ground near the rear hatch. These are the symptoms another member (Dougie's baby brother Scott?) posted a year or two back.

-B-
 
My rig also has some other wiring issues like the rear wiper inop most of the time and 3rd brake lamp inop. The rear doors also when open dont trigger the dome light to come on umless you play with the plunger. Also when the lift gate is open the 1st dome light is dim and the 2nd doesnt come on and it make a fant humming noise

I fixed my 93 by wiggling the harness, where it goes from the body to the hatch (upper left). Well it worked fine after that for about 12 months and 20k miles, when I sold it, still working.
 
I was having this problem as well. What it ended up being is I was hitting the lock button too quickly after shutting the door. It would still beep once and flash the lights, but the beep was longer and the doors wouldn't lock. It took me forever to figure this out. Now I turned off the beep and make sure I hear the doors lock or just peek thru the window and double check.


betcha a dollar that you're having the same problem that CreeperSleeper just described. I went through the same process until I realized what the deal was.

just to note -- when you get the long (non-locking) beep, the lights don't flash.
 
Rear Hatch Harness failure

I was having this problem as well, wipers didn't work, alarm having trouble arming, week dome light when on door open position and then I could not lock the doors. The doors would auto unlock as soon as I locked them. After reading threads I decided to open the back hatch panel first and look at the connectors. Simple to remove just un bolt door latch bolts 2 and then pry open the pop fitting around the plastic cover.

I just giggled the wire harness on the right side behind the wiper regulator and the alarm set and locks locked. So I removed the wiper regulator 1 bolt and looked at the harness. There was a 2 pin connector that appeared to be burnt or rusted so I pulled them apart. As I was pulling them I could here relays in the front and my 97 FZJ80 auto antena started moving. So I cleaned up the connector and put in some dielectric grease and plugged it back in. Everything worked again, wiper worked, dome light bright etc. See attched pictures.

I did not check the ground behind the roof liner driver side but am suspicious about the look of the connector. It was getting late and dark. Could this be a short to ground or just a bad coneccetion. Please Advise. Should I pull the headliner and check if everything is connected OK?
P1010187.webp
P1010188.webp
 
Timeout on unlock cycle.

The alarm has a timeout on the unlock cycle. If you unlock using the remote but then fail to open any doors within 30 seconds, the system relocks.
As far as the other oddities, I've had them too and agree that it seems it is based on the last state the locks were in. If I do not use the lock button on the door, everything seems to work fine.
 
From this link RS3000 Toyota Vehicle Intrusion Protection

about passive/automatic arming:

PASSIVE (automatic) ARMING is disabled when the RS3000 is shipped from the factory. To learn how to activate this feature, refer to the PROGRAMMING AND ADJUSTMENTS section.

To PASSIVE ARM the system:
Turn the ignition key to the "LOCK" position, and remove it. Exit the vehicle and close all entry points (doors, trunk or hatch).
The RS3000 will PASSIVELY (automatically) ARM 15 seconds after the last entry
point is closed. After 15 seconds elapse, the exterior lights will turn on for 2
seconds, and the PIEZO "CHIRPER" will sound.*

*The PIEZO OPERATION MODE, when set to "off", has no effect on PIEZO "CHIRPER" operation when the system is PASSIVE ARMING.

To DISARM the RS3000 after PASSIVE ARMING:
Press and release the REMOTE CONTROL's top button once.
or....
Turn the ignition key to "ON" or "START" within 15 seconds** of entering the vehicle.

**The ENTRY DELAY is factory preset to 15 seconds, and may be adjusted to 5, 15, or 30 seconds.
 
Back
Top Bottom