Door Stop

[brooklyn]

Anyone figured out a way to keep doors from swinging out if door stop hoops are gone? Same Issue for both doors and even a set of “backup” doors.

Welding would be an option, except I lack welder and welding experience.

Trying to figure at a short term fix....

 

[brooklyn]

 

[secretsquirrel]

since the door will need to be welded you could use a bolt washer and a canvas strap like heeps have.

 

[brooklyn]

After much searching found a 2018 mud thread that mentioned a SOR bracket $50.00 per bracket before shipping = ouch
A SOR bracket Part 124-14-BRKT.

Land Cruiser Front Door 1963-1974 40 & 45 Series

Land Cruiser Front Door, 1963-1974, 40, 45 series, weather strip, hinges, latches, regulator, hardware, striker, glass

www.sor.com

Not sure this is the solution, but thought I would post in case anyone else needs the info.

 

[LakeLaurashawn]

Overlooked by all of the larger complicated upgrades, completed a small update today - rear reflectors!

Lake

 

[kwkshift]

After much searching found a 2018 mud thread that mentioned a SOR bracket $50.00 per bracket before shipping = ouch
A SOR bracket Part 124-14-BRKT.

Land Cruiser Front Door 1963-1974 40 & 45 Series

Land Cruiser Front Door, 1963-1974, 40, 45 series, weather strip, hinges, latches, regulator, hardware, striker, glass

www.sor.com

Not sure this is the solution, but thought I would post in case anyone else needs the info.

I ordered one of these brackets for the DS door that was missing, (ripped out). I don't have a welder, so I just used a pop-rivet gun to attach mine with 4, 5/16" rivets. Works great!

 

[brooklyn]

Will follow your lead with rivet gun - thanks

 

[kwkshift]

Let us know how it works out.