Dissent Rear Bumper Land Cruiser 200 series

[tbisaacs]

Anyone else here running into clearance issues at the rear with 34” or larger tires? I am rubbing, ever so slightly, with LT285/75r17 and LT285/70r18 at full compression. Considering going bigger in the future but don’t want a tire getting wedged / stuck. Is it possible to adjust the bumper wings rearward a smidge to gain some breathing room?
@benc @radman to name a few I know are running larger sizes successfully with this bumper. I really want to avoid adjustable trailing arms and tinkering with alignment. The front of the rear wheel well has ample room but the way the that axle articulates at the rear is rubbing a bit.

View attachment 3661867

View attachment 3661868

View attachment 3661869

Yup. I swapped in Perry parts extended bump stops and they don’t rub anymore.

 

[TLC2013]

Yup. I swapped in Perry parts extended bump stops and they don’t rub anymore.

Cool, good to know even your new 35s they clear with the extended bumpstops. Ideally i'd like to clear without limiting travel but at the same time i am already rubbing the inside of the wheel well raw in a few spots.

 

[TeCKis300]

Cool, good to know even your new 35s they clear with the extended bumpstops. Ideally i'd like to clear without limiting travel but at the same time i am already rubbing the inside of the wheel well raw in a few spots.

A mild body might be a good option.