Detailed 1FZ engine drawings needed please...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 10, 2008
Threads
33
Messages
502
Location
South Wales, UK
Hi guys,

I have searched and searched (this site and many others) but to no avail. I am looking for detailed drawings of the 1FZ-FE engine.

Does anyone know where I could get some?

I have found this site http://www.toyodiy.com/parts/ where you can select your car, and drill down into it to find almost any component and part number, but it doesn't give dimensions.

Thanks in advance for any help

(btw, as a newb to Landcruiser 80's I still have that stupid grin you get from 4.5 litres of 6 cylinder silkiness)
 
I really don't think Toyota would release that kind of detail of any of their designs. What exactly are you looking for?

Thats what I'm thinking too. I was just hoping that maybe someone had got them onto the internet.

Specifically, I want to know the detailed dimensions of the exhaust manifold, especially the dimensions of the exhaust ports and the position of the threaded studs.
 
I think I'd just buy a new exhaust manifold gasket, and either scan or manually digitize it. Making a custom header?

Good guess!

My line of thought is this - look into fitting a custom header, and the turbo off a diesel 80 (quite common here in the UK) with a custom down pipe for the exhaust. Use hi temp hoses for the rest of the plumbing.

Similar capacities (4.2 vs. 4.5 litres), similar rev ranges (well, where I use it lol) so I'm thinking 'why not?'

Here's a pic of the intercooler I fitted to my diesel Hilux Surf

OILFILLER2.jpg
 
Good guess!

My line of thought is this - look into fitting a custom header, and the turbo off a diesel 80

You need to check out Landtank's custom turbo manifold project. He also might be able to help you with some of the dimensions.

If you are looking for some sales type of cut-a-way drawings for the 1FZ-FE then look in the 1996 LX450 New Car Features manual. It will NOT have detailed engineering drawings with precise (or even approximate) dimensions.

-B-
 
Good guess!

My line of thought is this - look into fitting a custom header, and the turbo off a diesel 80 (quite common here in the UK) with a custom down pipe for the exhaust. Use hi temp hoses for the rest of the plumbing.

Similar capacities (4.2 vs. 4.5 litres), similar rev ranges (well, where I use it lol) so I'm thinking 'why not?'

Here's a pic of the intercooler I fitted to my diesel Hilux Surf

OILFILLER2.jpg

I was right where you are a year and a half ago. Good luck with your project.
 
Back
Top Bottom