Custom Speaker Boxes?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 21, 2006
Threads
56
Messages
158
Location
Fayetteville, AR
I'm about to put a radio into my 40 and I have to build the box/boxes tomorrow as I have to leave soon to go back to school. I'm building a custom box/boxes. I'd appreciate any tips or pictures anyone could provide. I've already decided to place them directly behind the front seats and most likely point them upward as to get the best possible sound. I'm putting in two 6x9 Pioneers...are there any advantages to using one big box over two smaller ones, any tips for keeping water out, etc. any info would be very appreciated I will be using plywood to build them most likely
 
I would suggest building some custom boxes or even buying your standard run of the mill 6x9 boxes and mounting them to the roll bar in the rear corners of your tub. I have the driver rear corner speaker facing at an angle directly toward the passenger and and the pass rear corner speaker facing directly at the drivers head. works good and out of the way of the floor also i think it projects directly to the ear ill take some pics when i get a chance
 
i just bought a couple of cheap boxes and put them behind the seats with 6x9 jbl's in them. works fine, sounds good.
DSC_0424.webp
 
built mine from 3/4 MDF, make sure you seal it with a silicone because thats what keeps it air tight (not the screws.) i'd go with one big box, it really doesn't matter if you use one big or two small (the chances of them working "against" eachother are slim. you can fill them with Poly-fill to make them sound better (slows down sound waves, cuts resonance and makes the speaker think that the box it actually bigger then in reality) check a couple differenet sites, onlinecarstereo.com has a good line of marine qaulity speakers, amps and stuff which are a bit more water proof then others.
 
Back
Top Bottom