Cruise Control not working

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 6, 2007
Threads
352
Messages
3,413
Location
San Juan Puerto Rico
Website
www.facebook.com
This is one of the "few" things that do not work on "El Tractor Dos", I noticed a couple of days ago. I looked at fuses, but they all seem Ok. Where should I look??:confused:
 
If the dash BRAKE lamp is on, CC is deactivated.

The 2 things that illuminate the BRAKE lamp are the handbrake handle and the brake fluid reservior cap. If the cap switch fails it sometimes goes into a partial closure that will very dimly illuminate the lamp. So much so that you can't see it in daylight. This will deactivate CC as well.
 
Looks like I'll be busy this coming weekend. I just got the radio working... music!!!!:bounce::bounce2::wrench::wrench::wrench: I still have to tackle the power windows on the passenger side, they don't come down, more :wrench::wrench::wrench:.
 
I hope it doesn't come down to this, but you might learn something here:

Cruise Control Actuator Service

BTW if you look through the pics you will understand why "cycling the lever" does very little to fix the basic problem, other than to make you feel good. The inside of the unit gets plugged up with hardened gloppy grease.

Cruise_15.JPG


Several years after gutting my servo and reassembling it, my CC is still working flawlessly.

Good luck.

John Davies
Spokane WA
 
You have the FSM?

There's a very cool, very definitive diagnostics mode for the cruise control system. Allows you to pull codes (as with the CEL) and easily pinpoint the problem.

Curtis
 
You have the FSM?

There's a very cool, very definitive diagnostics mode for the cruise control system. Allows you to pull codes (as with the CEL) and easily pinpoint the problem.

Curtis

I'll check.
 
Hey John, what were the symptoms that led you to teardown the CC module?

I hope it doesn't come down to this, but you might learn something here:

Cruise Control Actuator Service

BTW if you look through the pics you will understand why "cycling the lever" does very little to fix the basic problem, other than to make you feel good. The inside of the unit gets plugged up with hardened gloppy grease.

Cruise_15.JPG


Several years after gutting my servo and reassembling it, my CC is still working flawlessly.

Good luck.

John Davies
Spokane WA
 
Back
Top Bottom