Clutch Master Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 18, 2005
Threads
14
Messages
2,415
Location
Willamette Valley-Oregon
I just discovered that my clutch master is starting to seep fluid-71 FJ40. Does anybody know if the mini p'up master and slave will be adequate for this application?
 
I am collecting parts for a 4 wheel disc conversion. I picked up a newer/larger booster at the local pick-a-part. The new booster looks like it will set very close to the clutch master. While at the local yard I noticed the clutch master on a mini p-up was much smaller in size,possibly making for better clearance to the booster if needed. I'm just looking for info so I can be prepared in case I have clearance problems when I start the brake conversion.
 
Welcome.



Your firewall is set up for a power booster...You should not have any fittment issues with an OEM clutch master.


The master for a mini does not mount the same as your 71.



Good luck!


-Steve
 
Thanks for the info Poser! Onward and upward with the brake part collection. I have almost all I need to start the swap except for TIME!
 
Back
Top Bottom