Chevy disc conversion---late FRONT axle?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2004
Threads
3
Messages
27
I have a spare late front axle with the good steering arms etc...gonna do a cut and turn on it after this summer.
Rotors and calipers are toast on that axle and the ones on my rig now are a little iffy for retrofitting during an axle swap. They've been around for a long time...

I'm wondering if anyone has done this Chevy brake swap on a DISC equipped Cruiser axle.

LOOKS like the two factory caliper attachment lugs would make a conversion brk for the Chev caliper a simple flat plate (unlike the required brk for the drum conversion kit)...with perhaps just some spacers to aid alignment, but I haven't measured anything...just eyeballed it so far.

Sure would save some cash, considering the difference in prices and I can fab the brackets easily.

Has it been done or TRIED???
 
CruisinGA said:
Why??

Calipers are $80 a pair reman at Napa, good wagner rotors are not much more...

Whats the reasoning behind this extra work?



Up here in the great white, I've paid almost $80.00 each for a reman caliper...including what I got back in core charge! Had to order it in too!
Chevy caliper is under $20.00 and always in stock.

Rotors are also more expensive...(have to check the exact price...like $80.00 each.) Gotta order them too.
Chevys were just over $40.00 if I remember correctly and in stock.
Resizing cost $20.00 for the index holes on the set...

The slip-on design will give a spacer effect to add some clearance where my tierod grease nipple rubs on the right tire when fully cranked.

Simplified spare parts.

I like making things...and besides, two caliper brks are not much of an addition to a C&T, new spring pads and a reinforced diff cover area.

I don't need to know HOW to do this BTW...I'm just thinking there MIGHT be a clearance issue with the (what I believe to be) slightly larger late disc knuckles over the older drum knuckles that you CAN buy a kit for.

If it has been done already...that possibility becomes a non-issue and I'll pick up the parts over the summer.
 
Sculpin74 said:
Up here in the great white, I've paid almost $80.00 each for a reman caliper...including what I got back in core charge! Had to order it in/QUOTE]
Ever heard of mail order? Me thinks you are trying to reinvent the wheel.
 
rockauto.com rotors about $10
Go with newer calipers, bigger pistons, cheaper about $50
Not having to fab up junk.. Priceless
 
Thanks for the tip TAC!
That is an incredible price. Are they high enough quality to use on a daily driver?

NOW I see why I got the response I did...
 
try NAPA online, they are paying more for the core than you will for the new caliper
 
Back
Top Bottom