Cheapish Center console ...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It would be nice if the Tuffy came in brown to match my interior. When I talked to them about what it would take to get a brown and then just a raw one was outrageous. Not available raw and to change the color to a "special" was a big jump to an already high price. I have nothing Tan or Beige in the truck except the headliner.
 
^^ haha that is exactly what I was thinking! Btw, nice mod. I need to look into that. Is the top wider than the stock console?
 
This cracks me up coming from a guy who drives a Japanese truck.

There is a big difference between Japanese and Chineese. If there are two otherwise "equal" options, I'll take the US made one. There isn't a US made equivalent to a Land Cruiser. I won't even get into how many "American" cars are not made in the US or that my wife's Honda is, or that the Tundra has more US content than any other full size truck. So I'm not sure what I'm supposed to buy that would be made in the USA.

Someone wanted to know why the price difference, it's cause one is made with nearly slave labor in a country run by a dictator, and the other is made here. $10-15/ hr vs. $0.34/ hr makes a difference in cost. The $.34 isn't an exageration either, that's what we use when comparing manufacturing cost in the states vs. asia. Though the demand for chineese manufacturing is getting high enough that it is now getting cheaper to go to Vietnam for labor. Sad state of afairs for sure.

Wasn't really making too much of a political statement (until you said it cracks you up) - just pointing out there is one obvious reason for the price difference. It's the same obvious reason a Warn Winch cost twice what a Smittybuilt one does. You're free to support whichever manufacture (and country) you want.
 
There is a big difference between Japanese and Chineese. If there are two otherwise "equal" options, I'll take the US made one. There isn't a US made equivalent to a Land Cruiser. I won't even get into how many "American" cars are not made in the US or that my wife's Honda is, or that the Tundra has more US content than any other full size truck. So I'm not sure what I'm supposed to buy that would be made in the USA.

Someone wanted to know why the price difference, it's cause one is made with nearly slave labor in a country run by a dictator, and the other is made here. $10-15/ hr vs. $0.34/ hr makes a difference in cost. The $.34 isn't an exageration either, that's what we use when comparing manufacturing cost in the states vs. asia. Though the demand for chineese manufacturing is getting high enough that it is now getting cheaper to go to Vietnam for labor. Sad state of afairs for sure.

Wasn't really making too much of a political statement (until you said it cracks you up) - just pointing out there is one obvious reason for the price difference. It's the same obvious reason a Warn Winch cost twice what a Smittybuilt one does. You're free to support whichever manufacture (and country) you want.

Completely Agree. All things being equal I buy US. (I looked at other options and there realy isn't a used US equivalent of the 80 series)

I'm not saying nothing I own is made in China..... that would be almost impossible and extremely expensive. But things I care about especially the cruiser are either made here, Europe, Australia or Japan. Build Quality from these places are much higher than most other places.
 
1973Guppie - Can you please take of pic of the inside, just want an idea what it looks like everywhere.

BTW, nice fro :cool:
 
I was just wondering if the lid opens all the way or just as the picture shows.

Not making fun of, just noticing you look like the Gabe on Welcome Back Kotter when he let his hair grow longer. :D
 
Open it up and show the inside please
sorry for the long delay ...that is a standard size magazine in the console to give you an idea of space.

I've also added, although no pics, dual 12v outlets on the driver's side bottom extension panel. The side mounting keeps the plugs away from feet and still has plenty of room to plug and unplug accessories. I may add cup holders to the rear, but would want to do it in such a way that they didn't interfere with either knees or folding the seats up.
IMG_0678.webp
IMG_0679.webp
IMG_0681.webp
 
Could you have moved the console up some more to cover up the opening behind the shifter?

I installed the Smittybilt console and had Fibrenew redye the steering wheel and shifter tray console in black to better tie in with the black Smittybilty center console, plus my steering wheel was due for reconditioning anyways. I also filled in the opening behind the shifter for a cleaner looking install.

Smittybilt Console_Steering Wheel_Console Tray redyed black.webp
 
Last edited:
If this is steel..... why not re-spray it brown? I like this console, but being from China.... I'll pass on it.
Looks great though!
 
If this is steel..... why not re-spray it brown? I like this console, but being from China.... I'll pass on it.
Looks great though!

Thanks, the reason I didn't paint the console brown is because I am not a big fan of the oak/tan colors to begin with especially with my black exterior. The black console helped to tie in some more black to an already overly brown interior imo. I hear you on the China thing but the reviews were good, as far as overall quality. Not a Tuffy I am told but a big upgrade from the crappy plastic oem console...and I didn't realize how much I missed an arm rest until I had one again.
 
Last edited:
Back
Top Bottom