CDL Switch vs Dual Diff Switch?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 14, 2012
Threads
17
Messages
109
Location
Nashville, TN
I have a 95 LC (profile pic), went to read up on installing the CDL switch, and realized what I have is not what is described in most threads!
I bought the 60020 part, described as the Dual Differential Lock switch - round, 2 positions, locates to the left of the steering column. Everyone on here seems to be installing a single pushbutton switch above the radio.

I don't have factory lockers (K/292 code on the door revealed that), so is this switch even useful for me?
 
Get yourself some Harpo e-lockers and retrofit it ! :hillbilly:

Yes, sounds like you bought the magic dial. While you could probably rig it, probably not worth the hassle as the CDL wiring is sitting right above the radio for PnP install or little trimming of hazard switch.
 
My 1994 looks like this one. Very easy to install since the wiring is already behind the dash and I was familiar with how to open up the dash after installing a new stereo.

I'm not sure if the 1995's look like the 94's or the newer style.

upload_2017-10-31_8-52-50.webp
 
My 1994 looks like this one. Very easy to install since the wiring is already behind the dash and I was familiar with how to open up the dash after installing a new stereo.

I'm not sure if the 1995's look like the 94's or the newer style.

View attachment 1565784
what steps are needed to take off the dash , i just purchased this switch. also i have a loud rattle below my steering wheel, how many bolts hold down the panel under the wheel. thanks so much
 
what steps are needed to take off the dash , i just purchased this switch. also i have a loud rattle below my steering wheel, how many bolts hold down the panel under the wheel. thanks so much
If you haven't already found your way into your dash, this is the video I used to find my way in.
 
Back
Top Bottom