carb/tune up help?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 25, 2005
Threads
196
Messages
2,277
Location
Central valley (Cali)
ok i edited my post... after reading more,i'm going to send mark(marks offraod)my carb,

still trying to find tune up info ie timing,plug gaps and the proper way to do a valve adjustment....


thanks
 
Last edited:
You need a manual, Factory Service Manual perhaps. ;)

In the mean time you can use a Haynes for the gap specs. What do you want to know about a tune up?

Replace:
Cap
Rotor
Points
Plugs
Wires

Set the points gap by making sure it's on it's open cycle at the top of the lobe with the feelergauge size stated in the manual (or some of us just use the thickness of the cardboard that the points come in ;) ). Set the spark gap and run it...

Been a while since I adjusted valves on one, so anyone could jump in here. Make sure the engine is at operating temperature, make sure that the rocker is free and not on it's down cycle pushing on the valve, insert the size feeler gauge as stated in the manual for either intake or exhaust between the valve head and the rocker, adjust the screw and jam nut and make sure the feeler gauge slides in and out snugly (not sloppy loose, not too tight).

Not too hard man, let us know if you get hung up. :beer:
 
thanks hawk...got new plugs putting them in tomarrow have to track down who has a manual..(sor/manafre)local parts stores dont have early enough....


Thanks bro
 
Did you try the carb tune up tips in the FAQ?
 
yes i did romer no luck though?
 
woooohoooo damn what a little work can do for the old girl(my fj)did everything but adusting the valves its like anew rig all the little kwirks it had before ahhhhhh.

thank folks
 
Back
Top Bottom