Carb conversion to EFI...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Thanks guys, I will keep that into consideration...

I am in week 3 of owning this, and that was one of the things I am thinking of changing on it.

BTW...never have posted picks of my 40 until now...
 
Whenever TBI comes up megasquirt seems the way to go for a lot of people: http://www.bgsoflex.com/megasquirt.html

Many more links available in the expertly and carefully compiled FAQ (FREQUENTLY ASKED QUESTIONS) in this site.

Oh, and you ask if it's even worth doing?

Yes, it does seem to be a way to resolve a couple of the most persistent cruiser problems - dying, starving at extreme (or even not-so-extrem) angles, and hard start issues both hot and cold. Some report improved fuel milage and smoother more powerful running as well.
 
Thanks again,

Well then..it seems as though I will be off on a search to convert.

Now, for the budget-minded out there (namely me), are there any vehicles in the boneyards that may have a system on it that can be adapted to my setup? Has anyone attempted this and been successful? I do not mind being creative on this thing, but I do want it to work.

Suppose I will begin my search through the forums...
 
Poser said:
Shoot pictures, take notes, create a write up out here so others can see what is involved with installing this on a 2F.



:beer:
Steve..

Thank you for that link. THAT was what I was looking for a week ago when I began my inquiry. Just now got the time to check into it.

Again, my thanks to you.
 
The link that honk provided has A LOT of great information.....If you have not read through that, I would suggest getting a couple beers and doing so.
 
spdwaver1
I have read info online ( and saved the sites, I think ) about the GM tbi swap. The GM 4.3 v6 was the donor. I will try to find the info tomorrow afternoon and post the site addresses for you.
 
For junk yard parts look at GM trucks/vans with 4.3l v6. I used parts out of a '91 astro. Get everything you could possible need, TBI, ECM, wiring harness, sensors etc.
I have some wiring diagrams and manual pages on my write up. http://olympiafj60.home.comcast.net/cruiser_TBI.html
 
Back
Top Bottom