Calling all 3D printer people

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 8, 2006
Threads
463
Messages
13,550
Location
New Jersey
Website
www.sdsysdesign.com
OK, so this might be borderline tech, but do any of you 3D printer guys/gals sell flat plastic ashtray inserts that are color matched to an LX450s oak interior?
I suppose I won't cry if it doesn't have the same faux wood finish, but a color match would be nice.
I want to use them for USB ports in the front passenger door and the 2 rear doors and would rather not cut apart the OEM ashtrays like I had to do on my 91.
 
OK, so this might be borderline tech, but do any of you 3D printer guys/gals sell flat plastic ashtray inserts that are color matched to an LX450s oak interior?
I suppose I won't cry if it doesn't have the same faux wood finish, but a color match would be nice.
I want to use them for USB ports in the front passenger door and the 2 rear doors and would rather not cut apart the OEM ashtrays like I had to do on my 91.

I asked @bhicks about this and posted it in tech a few weeks ago. I was asking more for the 91-94 dash personally...

There was some interest. I think we need some more though. My by count there were 10 interested in 91-94 and 3-4 interested for 95-97.

I NEED this!
 
I asked @bhicks about this and posted it in tech a few weeks ago. I was asking more for the 91-94 dash personally...

There was some interest. I think we need some more though. My by count there were 10 interested in 91-94 and 3-4 interested for 95-97.

I NEED this!
I think he is referring to the ash tray inserts in the doors, like he did in his other 80.
 
Oh. My bad. I forget about those because I never sit in the back seat.
 
They make wooden 3D printer filament, but I'd be more inclined to get some woodgrain contact paper and maybe spray some clearcoat over it.

I also plan on making some adapter to fit in my center ashtray and also a "big switch to small switch" adapter.
 
This is a project I'm open to developing. I'm just about done with my list of projects I previously commited to. The 91-94 80 Series Aluminum TEQ grille badge is ready for market, and the 60 series and 2nd Gen 4Runner Cup Holders are getting close. Once those are done and up on my website then I can shift over to this. I will be developing the same ashtray USB charger port for the 3rd Gen 4Runner guys at the same time so all of the wiring and plugs for mockup have already been purchased. I think I should have all of the current projects done by the end of this month and can knock out this new project in October. November and December are my CRAZY busy season so there will be on R&D going on then.
 
Last edited:
Spray paint! :hillbilly:
 
Well if someone else takes over this project I won't be disappointed. I was working on something that is plug-n-play with an aluminum top that was paint matched.

image.webp
image.webp
image.webp
 
Nobody asked for my opinion, but I'd prefer 12v cigarette outlets with flush-mount USB chargers instead of all one unit. The BlueSea stuff is nice but doesn't support quick charge 2.0 or 3.0, so it's less useful on pretty much all modern Android phones. Plus, the chargers could be removed to connect any of the other 10,000 things that go into a cigarette lighter outlet.
 
Well if someone else takes over this project I won't be disappointed. I was working on something that is plug-n-play with an aluminum top that was paint matched.

View attachment 1317181 View attachment 1317182 View attachment 1317183
Perfect. Then the project is all yours. If for some reason way down the road folks still want the dash ashtray 12volt plug then I will look into at that point. For now, you have a great start, great idea, and looks like you already figured out the electrical logistics and the install. Have at it.
 
Nobody asked for my opinion, but I'd prefer 12v cigarette outlets with flush-mount USB chargers instead of all one unit. The BlueSea stuff is nice but doesn't support quick charge 2.0 or 3.0, so it's less useful on pretty much all modern Android phones. Plus, the chargers could be removed to connect any of the other 10,000 things that go into a cigarette lighter outlet.

The BlueSea in my example is not the final I'm using. I just used that for testing because I have like a dozen of them.

I actually am going to use the Carling USB not only because of power but because it's ip64 compliant. Since its on the doors it WILL get wet.

V-Charger | carlingtech.com
 
Perfect. Then the project is all yours. If for some reason way down the road folks still want the dash ashtray 12volt plug then I will look into at that point. For now, you have a great start, great idea, and looks like you already figured out the electrical logistics and the install. Have at it.

Yeah but I haven't moved this marble in months. I had the feeling there wasn't interest. I guess perhaps there is after all.
 
I have my reasons for not liking the typical 12v cig. Especially for the rear doors which will only be used for charging my daughters stuff and my mine.

@nlx Will the PnP work without key?
 
Perfect. Then the project is all yours. If for some reason way down the road folks still want the dash ashtray 12volt plug then I will look into at that point. For now, you have a great start, great idea, and looks like you already figured out the electrical logistics and the install. Have at it.

I still want the dash...
 
Back
Top Bottom