bypass filter does work

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

God! I must be wasting alot of money. I change all the synthetic and filter in my Vette every 3,000. The mazda rx-7 w/ the stroker gets it's oil changed every 500 miles since it get more dragstrip time than anything. The dodge diesel gets it's Rotella oil changes every 3k. Nah, I'm anal I guess.:grinpimp: Want to see the inside of mine??:censor:
 
God! I must be wasting alot of money. I change all the synthetic and filter in my Vette every 3,000. The mazda rx-7 w/ the stroker gets it's oil changed every 500 miles since it get more dragstrip time than anything. The dodge diesel gets it's Rotella oil changes every 3k. Nah, I'm anal I guess.:grinpimp: Want to see the inside of mine??:censor:

Yes, you are wasting your money. I don't buy into the toilet paper filters, but you should be running at least 7k intervals on your Vette and the Dodge.
 
Yes, you are wasting your money. I don't buy into the toilet paper filters, but you should be running at least 7k intervals on your Vette and the Dodge.

x2 you can go even farther on the dodge with a simple bypass system...to figure out how much more blackstone reports can anaylize your oil and give you feedback needed for target oil changes.....I run 7500 miles on my powerstroke using rotella the top end looks brand new with 190k on the clock ....also go 5000 on the cruiser with rotella synthtic.....3000 mile oil changes are overkill imho....
 
BTW If you look into a bypass oil filter stay away from the Amsoil dual bypass, it is the easiest to install as you do not have to plumb a return but it purposely restricts the main oil flow to the engine./quote]


Do you actually see a problem here? Oil pressure may drop a little once you're up and going compared to the "plumbed" bypass - I was advised by Amsoil that it could be as high as 5 to 7#s in some vehicles but the amount of oil flow to the engine was more than sufficient. The reason I ask is because I'm running Amsoil's dual remote on a Tundra for ease of changing filters, extended drain intervals and it was an easy install. I hooked up a mechanical gauge when I first installed it to see for myself if there was going to be a problem with pressure and IIRC the startup pressure was around 50#s and when warm and ideling around 12#s, which I thought was OK for the 4.7L.
 
What are all those blue / green hoses? You got a hot water lawn sprinkler system?
 
Details, more pics, etc. please.
 
hey wolfy, this is some really good snake earl, huh ;)

Yes, Instigator, that is good, clean snake oil.

Now, why did you have to tear into your engine? Did that toilet paper kludged up system of hoses and canisters and valves and widgets finally clog up your oil system or something. ;)

-B-
 
BTW If you look into a bypass oil filter stay away from the Amsoil dual bypass, it is the easiest to install as you do not have to plumb a return but it purposely restricts the main oil flow to the engine./quote]


Do you actually see a problem here? Oil pressure may drop a little once you're up and going compared to the "plumbed" bypass - I was advised by Amsoil that it could be as high as 5 to 7#s in some vehicles but the amount of oil flow to the engine was more than sufficient. The reason I ask is because I'm running Amsoil's dual remote on a Tundra for ease of changing filters, extended drain intervals and it was an easy install. I hooked up a mechanical gauge when I first installed it to see for myself if there was going to be a problem with pressure and IIRC the startup pressure was around 50#s and when warm and ideling around 12#s, which I thought was OK for the 4.7L.


So using Amsoils numbers you would have had 17 to 19 PSI at idle before installing the filter? that is a considerable difference. it probably will be OK but it is counter productive IMO. on a test setup Bob saw much larger pressure reduction, there are questions on how closely the setup follows an actual engine though.

what I would really like to see is two gauges before and after filter in a running working engine see what the pressure drop across the filter is.
 
what I would really like to see is two gauges before and after filter in a running working engine see what the pressure drop across the filter is.

We would have to standardize it. I bet Charmin causes a larger pressure drop than Scott. :flipoff2: :flipoff2:
 
i'm getting roughly a 10psi drop across the filter element at idle, and it steadly climbes when reving. my 60 psi gauge at the filter pegs out when revved up, maybe about 3-4k. and i'll beg to differ about the different pres drops between charmin and the scott :D the scott is wrapped much tighter than any other john wayne paper that i've handled.
 
wow!!! wolfy you plum skipped over the very first post, didntcha? naw the gasket was seeping a little.

No, I didn't skip over the first post. I have had you on my ignore list for 4 years so I don't get any of your posts. Unfortunately, someone who shall remain nameless, PM'd me with a link and asked me to check out the weirdo that was using toilet paper as an oil filter. That's how I got sucked into another one of your threads.

However, I do find that the picture you posted indicates that engine is very clean up top. Clean as a baby's butt. :D

-B-
 
Been wanting to put a bypass oil filter on my 80 for a while now. Is there a prefered supply and return spot ? Instructions say to "T" off the oil sender and return to the valve cover... Is there a cleaner way to do this in the 1FZE ?
 
Back
Top Bottom