Bump stop part number

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 19, 2017
Threads
14
Messages
275
Location
Vermont
My cruiser didn't have any of the bumpstops on it when I got it and I need the factory part number for them. I couldn't find the number for the life of me. Or if there is an aftermarket alternative that are cheaper let me know since I'm sure factory ones won't be cheap for what they are. I'm talking about the frame side bump stops not the ones inside the coils.

Thanks for any help
 
Yup that's the one. Thank you much sir. I assume they are the same for front and rear?
 
5EBCB9DB-DB40-434D-B994-795A61193444.webp
E7491E63-CFA7-437E-9210-5C0BFACB3F7D.webp
The front one on mine looks a little different but basically the same.
 
I never would have thought to look up bumper sub-assembly.... I didn't see any listed on Toyota for the front.
 
The front is not the same as the rear the bolt spacing is different, some cruisers have them some don't my 94 came with fronts and rears, buddies 92 has only the rear
 
How needed are they in general? I haven't been able to do any real articulating in mine yet so I haven't worried about it but if I don't really need them then I won't spend the money
 
How needed are the fronts? You should have the ones in the springs so not needed really, since I have front and rears I did my drop bump stops with those instead of the spring ones cause it was easier, my set up and needs is likely different then you though I'm running 12 inch shocks with 37s I'm after more droop then up travel
 
Yeah I just have little baby 33's and it's my daily so it doesn't get to see much off-road as I would like. Thanks for the info
 
I also put the rear frame type on the front and removed the ones in the spring. Much easier to install if you don’t have anything in the front at the moment.
 
No I have the ones in the springs. I have nothing in the rear I probably should buy some for the back
 
Back
Top Bottom