build your custom TUB??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Search for Poor Wally Tubs on the forum. Lots of info, and a lot of guys that had him build their tubs. He does everyone custom for the truck, and hard doors and tops will fit, if that is what you want. The tubs are beefy, and made more for wheeling than show, but people like BigRedfj40 made his very pretty.

3/16th's sides, 1/4" supports and main beam. Definantely stout. Mine has taken some real shots, no real damage. JonnyC on this board rolled his truck at 55MPH on the highway and they reused the body on the rebuild.


So to answer your question, yup it can be done. It is really time consuming and not cheap to do it yourself. I would bet in materials alone he is well over the 1K mark on a tub.

My tub.
 
Last edited:
back-

The paint missing was from falling onto a rock from around a foot above it and dragging the truck off it. Just took off the paint. :)
 
Last edited:
I got my very first 'cruiser returned to me awhile back and it was completely rusted out. I wanted to save it and have built most of the tub from scratch without much trouble or expense.

I did save the dash/firewall by cutting that off along that seam just behind the a-pillar. I also cut out the door channels and the hardtop channels b/c I could figure out how to form them easily and they weren't in bad shape. It's been surprisingly easy but very time consuming. I used 1/8th in treadplate for the tub and it is WAY too heavy.

I got most of my steel as drops and seconds from a big supplier before prices got insane. If I had to do it now I'd price out the steel and compare the time with getting something like this aluminum tub:

http://cruisersolutions.com/index.php?main_page=index&cPath=4_25

It's pricey at $2100 bucks but you never have to worry about rust again! I saw one years ago and it was really well done.

If you want pics of what I did or how I did it, email me at ckolloff at hotmail dot com.
 
I think it's done for good now. I inherited it after my bought a new one. She had dropped this one and broke the battery cover off. I had been using it for one year after that with no problem but now it just died. The previous one got filled with mud :grinpimp: I'm on the market for beefy cheap
 
so I says to my buddy, over a few cans of olympia(oly oly o), "hey, i got all this diamond plate here and a rusty tub..."

a few rivets and a case or three later, good as new!

diamond40.jpg


(not mine, but o how i wish! :crybaby: )


[size=-2]apologies for the chat[/size]
 
so I says to my buddy, over a few cans of olympia(oly oly o), "hey, i got all this diamond plate here and a rusty tub..."

a few rivets and a case or three later, good as new!

diamond40.jpg


(not mine, but o how i wish! :crybaby: )


[SIZE=-2]apologies for the chat[/SIZE]

You gotta love what beer will make people do. :beer: :beer: :beer: That thing is fugly but in an awsome way
 
Rabid thats the uglist cruzer I ever seen. :flip: How does it stop? good?

But seriously though, I have been working on one of wallys tubs for a bit now, and overall I am pretty impressed. I have noticed that his desighn and workmanship over the years has changed (for the better) in a bunch of places.
 
I franken welded my old rotted 79' firewall to an 81 tub that had the firewall pushed in. I can tell you some things not to do. I am not completely done with the brazing yet but it shouldn't be too bad when I FINALLY finsih it.
 
so I says to my buddy, over a few cans of olympia(oly oly o), "hey, i got all this diamond plate here and a rusty tub..."

a few rivets and a case or three later, good as new!

diamond40.jpg


(not mine, but o how i wish! :crybaby: )


[size=-2]apologies for the chat[/size]

That is easily one of the fugliest things I have ever seen.


I like how the wheels are even diamond plated
 
Back
Top Bottom