broken stuff

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 24, 2017
Threads
4
Messages
37
Location
Juneau
Started wrenchin on my fzj this weekend and broke more stuff than expected while installing man-a-frito 30mm spacers. Heres some pics of how I de-brokified it.
 
Broke front shock stud. Grind down, weld some new boltage on.

20170831_154208.webp


20170831_155018.webp
 
More pics and story in a bit..Total damage..3 bolts broke off in frame and 1 broke shock.
 
Oh em Gee, just buy a new shock for pete's sake :flipoff2:

:edit: Just remembered, this is the $800 80, right? Proceed... :hillbilly:
 
Bilsteins on the way. 10 minute fix so I don't have to drive with no shock. So sway bar bolts broke off in frame and axle and some pics on gettin bolts out the easy way..Heres how it looks before..during and after. Ill just show axle pics.

20170903_150002.webp


20170903_150219.webp


20170903_153548.webp


20170903_153705.webp


20170903_153854.webp
 
I clean bolt hole, use weld to fill to washer, weld nut to washer, let cool, then back err on out. Afterwards I clean up the threads with a tap. Any questions...muahahaha

20170903_154334.webp


20170903_154454.webp


20170903_152413.webp


20170903_155240.webp
 
Ez outs are rarely easy. When ya weld to whats left of the bolts and they cool down, they contract and back right out. I'm sure someone has mentioned it in these vast forums before. If you break it 1st time, try again. Bolts in frame came out 1st try. Bottom of axle took me 3 tries.
 
I get em red hot with weld. Haven't boogered up threads yet with this method. When ya get em movin and backin out, I treat em like a tap. Go a lil till ya feel tension, back off. Over and over. I also used kroil.
 
I pretty much have broken every bolt there is on everything I've fixed. Getting to be an expert at break, drill and tap. It's like a dance. I swear the metal they use on these bolts is the cheapest sh*t known.
 
shocks are not that expensive, buy new.
 
Thanks but attitude not needed

Yep, I thought the same thing when I read your post. :meh:

Carry on OP, nice job on the busted bolt removals, I have had to do the same thing with exhaust bolts. And yes, EZ-outs are never that easy.
 
The shock repair will last as long as rest of the shock. I mentioned bilsteins on the way...Takes a while for stuff to get to me since only way is boat or plane. Some shippers are pesky with stuff like shocks that are pressurized...Man the prices add up..Already have paid more in parts and shipping than I paid for vehicle.
 
I learned somethin new on the bird...Just wikipediad it...Thanks. Big fan of em.
 
Back
Top Bottom