brake help please

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 25, 2006
Threads
8
Messages
48
I have a 1974 fj40 front drum axel. I also have a 1976 disc brake axel. Is it possible to put all the hardware from the 76 onto the 74 to convert the 74 to disc brakes. The reason is the 76 is a rusted out hulk were the 74 is clean. Any info would be great.

Thanks
 
It's virtually a straight swap of parts... you'll love discs after having drums:)
 
or swap the complete axle then you wouldn't need to mess around with setting the knuckles up.
 
or swap the complete axle then you wouldn't need to mess around with setting the knuckles up.

I prefer recommending the swap because there's too many guys out there that just put off replacing the knuckle bearings FOREVER and then come around asking why they have front end shimmy and death wobble issues.

If you do the swap, you don't have to move your pumpkins, pull rusty old U-bolts off your springs, and you WILL go thru the knuckles properly.

Best

Mark A.

P.S. You'll have to remove the residual check valve in your master cylinder too.
 
Back
Top Bottom