Brake fluid compatibility

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 5, 2006
Threads
167
Messages
1,481
Location
Albany, NY
Just received my speedbleeders and going to bleed the brake system.

Is the DOT 4 synthetic compatible with the 96 LX450?
If yes, do I need to bone try the DOT 3 in there, or can I just refill the reservoir as I bleed the system with DOT 4 synthetic?

TIA
Rami
 
Valvoline DOT 4 synthetic brake fluid is backwards compatible with DOT 3 brake fluid (both are mineral based). Just don't use silicone DOT 5 brake fluid. This is covered in the FAQ section IIRC. Some people suck out the old fluid in the reservior first, then top it up with the new fluid, then bleed and add as needed.
 
Note about the speedbleeders.
One of my speedbleeders was stuck and would not bleed.

According to the explanation I got, is that the ball system is being driven by pounding it in.
Sometimes the ball get stuck in a position that renders it inoperable.

So if it does not bleed, don't force it, be aware that it is possible for it to malfunction.
The company reassured me that once the speedbleeder works, it works and there are no issues.

They gave me no trouble at all sending me another unit.
 
Just received my speedbleeders and going to bleed the brake system.

Is the DOT 4 synthetic compatible with the 96 LX450?
If yes, do I need to bone try the DOT 3 in there, or can I just refill the reservoir as I bleed the system with DOT 4 synthetic?

TIA
Rami

How many bleeders do you need for the 80?
 
Back
Top Bottom