anyone know of a bolt on booster/master setup that i can use on my 77 fj40, i will be running 4 wheel disc. thanks for all help
brake booster
- Thread starter stevecast
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Try here: http://www.man-a-fre.com/pa/gmboostermasterconversionkit.htm
Man-a-fre has the full conversion or just the bracket for $59 so you can bolt a GM booster and M.C. on.
Kevin
Man-a-fre has the full conversion or just the bracket for $59 so you can bolt a GM booster and M.C. on.
Kevin
There are lots of options. I used one out of an 89 mini truck. Do a search, like this one https://forum.ih8mud.com/search.php?searchid=1438957&pp=25 to get more information. There are lots of bolt in boosters that will work. I got mine for $45 for the booster and M/C from the junkyard. It works perfect. Don't forget the check valve if you go this route. It is external, not internal like the Land Cruiser boosters.
Good luck!
Good luck!
Like's been mentioned above, there are lots of Toyota boosters that will work. You can see my posts here:
https://forum.ih8mud.com/showthread.php?t=115210
https://forum.ih8mud.com/showthread.php?t=81241
I used a booster out of a mid '80's 1 Ton 2wd Mini-truck which is a dual diaphragm but only 1/2 as thick as the stock '77 unit. To that I bolted '94 Landcruiser non-ABS master cylinder. I will be installing rear disks in the future.
Good luck
Jeff
https://forum.ih8mud.com/showthread.php?t=115210
https://forum.ih8mud.com/showthread.php?t=81241
I used a booster out of a mid '80's 1 Ton 2wd Mini-truck which is a dual diaphragm but only 1/2 as thick as the stock '77 unit. To that I bolted '94 Landcruiser non-ABS master cylinder. I will be installing rear disks in the future.
Good luck
Jeff