block heater install questions before ordering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 27, 2003
Threads
490
Messages
9,929
Location
North Cadillac
i did a search and came up with these threads:
https://forum.ih8mud.com/showthread.php?t=107778&highlight=block+heater

https://forum.ih8mud.com/showthread.php?t=9883&highlight=block+heater

https://forum.ih8mud.com/showthread.php?t=7035&highlight=block+heater


which leads me to a couple of questions. One, for the plug on the block, do i just punch it through or does it need to be removed?

Second, if TMS is no longer offering them as a toyota part even for canada, what is the best option? Vendor?

third, i thought i read, perhaps bjowett, put a circulator in line of his upper coolant hose. What are the thoughts on that vs. a block heater?

thanks in advance. just preparing for winter.
 
Dude...it doesn't get that cold in NC....

What is the purpose of the block heater? I mean, I understand what it is used for, but why ar eyou installing one? WHat are you hoping to gain in cold weather?

I think the 80 series does real well in cold weather, all things considered....and I live in Cleveland!

;)
-o-
 
i know it's not arctic, but i think that idahodoug has an awesome idea. have a powercable with a timer on it, so each morning before i go to work the timer flips on about 1.5 hours early, i walk out to leave and the rig is allready warmed up. Better for cold starts, better than scrapping ice off, better than sitting there shivering for a few stop lights until it warms up. Especially if it's not an expensive install.
 
concrete,

Can't you just crank up the heat a few degrees in your heated garage? Or, are you talking about the times when you have to park it at the Country Club or somewhere where the valet parking puts you out in the remote lot 'cause your Cruiser isn't new? I hate it when that happens.

-B-
 
CJ,

I didn't read any of the threads you marked, but my 93's had the plug punched into the block for 160K now, and the 97 I was able to pull the plug out. Seems like someone in Canada had worked out a source for these though I got mine from Dan. Thought Dan was no longer able to get them, but worth a call.

DougM
 
You really don't need a block heater in NC. We don't normally use them until the temps drop below 0*F

But regardless, it should be simple to find a block heater from normal aftermarket parts stores. We don't have any problems getting them here.

Stick withthe freezeplug (block) heater and don't bother with a tank heater. A tank heater will radiate half or more of the heat it produces into the air around it and the external heater hoses. And burn a lot more electricity in the process.


Mark...
 
CJ,

Forget all these guys tellin' ya that you don't need a block heater. You NEED one, man! Nothing says "I've arrived" in camp like having your Honda generator fire up at 5 am to power your block heater.....

Mike - I think the fit is an issue as to the angle of the heating element and such. There's precious little clearance from the freeze plug hole to the cylinder wall.

DougM
 
Some people punch the plug through, but most prefer to remove it. Punch it in at the edge, and you will probably be able to grab it with needle pliers and pull it out.

As far as aftermarket heaters, none of the parts places here had anything listed for a 93-97 landcruiser. As IdahoDoug said, the hole in the block is not very deep and you need to get the right heater or it won't fit. If you have a 93-97, just Google for a Canadian Toyota dealer and order the heater for a Previa - part #C0140-00144-S2. They fit just fine.
 
thanks for the response. I have found a source for the heater element. And based on the information above it seems that pulling the plug out or punching it through, either way will work.
 
i know it's not arctic, but i think that idahodoug has an awesome idea. have a powercable with a timer on it, so each morning before i go to work the timer flips on about 1.5 hours early, i walk out to leave and the rig is allready warmed up. Better for cold starts, better than scrapping ice off, better than sitting there shivering for a few stop lights until it warms up. Especially if it's not an expensive install.

CJ, you need a Remote Start system.

It was 20* here this morning, and I didn't scrape or shiver at all.

Added bonus: you can pre-cool the rig in the summer. :grinpimp:
 
i hear that, and that would be nice. Actually, the very first 80 i test drove had the remote start.

I'm pretty sold on the block heater thing. And no Doug, not when i go rolling into camp with a generator......just for when i'm home or go visit my dad up in chicago. Nice to be able to plug her in and in the morning she's ready to roll.
 
Think about it again. I picked a very nice one up for $170 and installed it myself. It's not too hard. Just think, if the Best Buy kids can do it...

I have all the wiring diagrams you'll need.
 
I'm all for getting heat out of the heater ASAMFP. Therefore, after I start mine from those cooler temps, I:

run headlights
run high beams
blower on full blast
rear heater fan on high speed
RR window defroster on
Windshield defog on (runs the a/c)

All this load will help warm my baby up in minutes. I can get the temp needle off the peg in less than one mile.

(Makes me wonder the improvement a block heater could provide...not saying it won't, or it's not worth it $$$. Just askin' what the actual observable is.)

Good luck during your install, CJ!
 
thanks. i found one for $7.....a block heater that is. It's even a toyota part.

Please share your source, if there is more than just the one you are getting.
 
Ben, i will share as soon as one is in my hand and i can confirm it's a reliable source. I was pointed towards it from another mud member who has one.....actually two. Yes, he installed two of them.
 
do these things leak often? catastrophic failure?

not great to lose coolant suddenly cuz of a bad heating element gasket I imagine.....
 
I live in Montana and have had one in every car I have owned. I have never had a problem and haven't heard of any either. I'm sure there must have been failures, but I don't know of any. My Subaru Tribeca has both a plug and a remote starter. I'm thinking of adding the remote start to the LC as well. The plug is just to make it easier on the machinery at 20 below. The remote start is to actually warm it up inside and defrost the windows for us lazy ones.
 
I had looked for one a number of years ago with no luck, but then Dan seemed to find a source.

I can also attest that the truck will start quite well after a very good cold soak. I was winter camping and it hit -30C one night and -35 the other. I was able to start, while most of the other trucks needed some heat.

Good tip on the Previa block heater.

However, if you need your truck to warm up faster in NC, then you need a better Tuque, eh?
 
Back
Top Bottom