Bill Dorry bracket question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 15, 2006
Threads
93
Messages
577
Location
Redding, CA
Anybody use Bill's PS pump bracket and retain their stock air cleaner? Mine a 1971 with stock F engine and cleaner not sure which years are the same. I'm trying to find out if the air cleaner will clear. Guess I also need a alternator bracket cica 1974 that mounts it on the passenger side, anybody have one?
 
Thanks Poser, spoke with Bill and he suggested I ask here about wether his bracket will clear my air cleaner. said nobody has ever got back to him as to if does or doesn't.
 
He had links to pictures of the bracket and pump installed in some of his previous posts out here....



In one of his posts, he linked Romers thread on power steering install with the WDorry power steering pump bracket....

Looking through that thread, I do not see how you will be able to keep the stock early air cleaner.


:beer:
 
The ones that I saw did not show the air cleaner. If you see one I'd like to see it.
 
Even easier.......will not work bud.




attachment.php
 
Hmmmmm, that looks familiar!
 
I just switched to a 2F intake, made a little adapter for the earlier '74 carb to the 2F aircleaner(with a stud) and used a 2F valve cover. It ain't the revered F aircleaner, but it is still Toyota. I also fabbed up a simple little adapter to get a warm air intake for cold starts that works with my header.
The power steering is worth the changes...IMHO

Ed
 
Bracket

From what I read it does not clear the stock air cleaner. So I bought one from Mark's Off road (http://www.marksoffroad.net/specials/Specials.html). Still waiting for it to arrive. Went with Bill's gerabox bracket though (waiting for it to arrive). Here is a picture of the 2F bracket I bought from the 'Wanted section' installed prior to the alternator move from driver to passenger side.

2fbracketmedium4fs.jpg
 
Just got off the phone with Mark, something I had not anticipated that he mentioned was the need to fabricate a tensioner for the power steering pump. Do you have a plan for that?
 
Back
Top Bottom