Bar'ing engine over

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 22, 2006
Threads
94
Messages
993
Location
Eastham, Cape Cod
Whats the easiest way to bar an F motor over? my 72 has been sitting since 91, and it wont turn. I have heard you can use the stock jack handle?? But mine wont go past the bib mount through the front... Am I missing something? :confused:
 
Remove all the plugs and spray a little lube in each piston and let it sit for several hours. Get a breaker bar and turn it at the harmonic balancer nut slowly. And with all the plugs removed it should be easier to turn. Mine has a fancy nut to turn the engine from the front. I have never used or plan on using it so I removed the nut and replaced it with a newer model nut.
 
Hand crank goes under the bib
 
Back
Top Bottom