Bam! Don't know what happened.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 28, 2004
Threads
72
Messages
1,101
Location
San Diego
I was backing slowly out of our home (circular) driveway downhill with the steering wheel cranked to the right. (I was riding the brakes as I backed out and down hard-right.) Half way through the turn we heard a loud BAM/Thump coming from what we thought was the rear end somewhere. The vehicle actually shook. My brother and I quickly got out thinking we hit one of the dogs, or something left in the driveway. We both found nothing. Did a quick investigation under the vehicle and nothing. Pressed for time we got back in and slowly test drove it down the street. It ran fine. Still running fine. Got back home and tried to recreate it but no-go. The vehicle seems in good shape.

I need your opinion on what it could have been :confused: Am I driving around with something broken??? :eek: I don't think so, but not really sure.
 
RonC,

Sounds to me like you heard the same noise my friends 87 Toyota 4x4 pickup would make during hard steering. He was told it is caused by the springs reacting/moving/flexing due to the "hard turn" flexing them to their max.
I can understand your concern after hearing such an ugly noise and after careful investigation finding nothing. Just remember..... It's a Toyota LC No worries!!

Others here may have different thoughts and ideas which I will heed, since most of the advice on this site has been of great help to me.

Peace!:beer:
 
how old are your rod ends?

Asking because my worn rod ends would occasionally make a loud pop that you culd feel through the steering wheel.
 
how old are your rod ends?

Asking because my worn rod ends would occasionally make a loud pop that you could feel through the steering wheel.

Rod ends are original. My bro was in the back seat. We could have sworn it came from the rear. I'll re-check the rod ends. What should I be looking for?
 
Nobody snuck an auto-locker into the rear when you weren't looking did they?
 
Sometimes when my rear OEM diff lock is unlocking, it will give off a loud clunking sound like the diff is shattering. Kind of unnerving the first few times, now I'm used to it.
 
isn't there a metal "stop" on the front? maybe you were hitting the full-lock stop and it 'popped' as you turned?

What do you mean by the metal "stop"?:confused:

I had the steering wheel already cranked to the right before backing up.
 
Ron, look at the rod ends for visual inspection of leaky boots ect. I couldn't really tell they were worn, but my steering was feeling looser and looser. The rod ends were original and had over 180,000 miles on them. Also, when i would go wheelin', every time the front end flexed it would make a real loud pop, even got it a few times when turning full lock. I replaced the rod ends and had a noticeable tighter steering. Also, no more pops.
 
I may be all wet, but it sounds like a case of overfear. You heard "something" but if it fails to repeat, why throw concern and money at it? As a mechanic in a former life, I heard many similar stories of doom when there was nothing to fix and no real problem. Check for anything loose and then if it does not repeat, then don't worry. Mechanics are the most paranoid people when it comes to noises and even we can realise that a single event does not present a trend. There is a syndrome known to mechanics as owner paranoia. You drive a vehicle for untold miles and then it fails you once. Then you become concerned about every little thing for a while. It takes a while for you to regain confidence.
I drove a Montero for 100,000 miles and then sold it to a friend. It had 280,000 on it when I sold it with a realitively new engine. I told him that it tends to eat a head gasket every 75,000 miles and that it had about 20,000 to go. It ate a gasket on schedule and ever since, he has been worried about everything. When he wore out the original factory clutch at 287,000 miles, he thought the truck was dead. We put a new clutch in and all was fine. We have replaced the head gasket once since he bought it.
Now he worries that it burns 1-2 quarts of oil every 3000 miles. A Montero was known to burn 1-2 quarts of oil in 3000 miles when they were new. A fresh engine can not be expected to be different. If a 4-cylinder Montero does not use oil, it is not running. That is the way Monteros are. He has fed it for several thousand miles, but now he is concerned because he has had several unrelated problems and he is looking for trouble. He is worried, but the truck does not care. It is a truck!
The moral is that you should not look for trouble where it does not exist because of a single incident. Do not lose faith in your reliable truck. Don't give in to worry. Worry is emotional and machines do not understand it at all.
Your truck is your baby, but it is really just a machine. It does not really care about your level of confidence. It only cares that all of its parts are working well.
Pay attention to your truck and listen for repeated problems. Don't get too upset by minor things. You may not be a mechanic, but you know your truck.
 
Last edited:
I was backing slowly out of our home (circular) driveway downhill with the steering wheel cranked to the right. (I was riding the brakes as I backed out and down hard-right.) Half way through the turn we heard a loud BAM/Thump coming from what we thought was the rear end somewhere. The vehicle actually shook. My brother and I quickly got out thinking we hit one of the dogs, or something left in the driveway. We both found nothing. Did a quick investigation under the vehicle and nothing. Pressed for time we got back in and slowly test drove it down the street. It ran fine. Still running fine. Got back home and tried to recreate it but no-go. The vehicle seems in good shape.

I need your opinion on what it could have been :confused: Am I driving around with something broken??? :eek: I don't think so, but not really sure.
Sometimes when I wash my truck and really spray inside the rear brakes they will tend to lock up, so after a while when I am ready to move it, it will clunk really loud when backing it out of my driveway. Might be something like this.....
 
It happened again. Slowly backing down a hill with the steering cranked full right. Just like before. It sounded ugly. WTF?! Shook the whole vehicle. I still have no idea where it came from.
 
Sounds like a drivetrain bind. You aren't running around in CDL locked, are you?

This is worth diagnosing...but remember this: things sound awful inside a rig that are minor. You would be amazed what an auto locker feels like if it disengages around a corner suddenly. You'd about think you got hit. If in fact it is only every few months and only backing up and only wheel fully cranked...then don't do that :D

Just see if it gets worse. If it is a loose suspension component you'll feel it elsewhere. Change your diff and t-case fluids and keep an eye on it. No big deal if it only happens as you describe.
 
If in fact it is only every few months and only backing up and only wheel fully cranked...then don't do that :D

I actually really like this advice. :)

Not kidding,

Curtis

P.S. [Usual disclaimer of liability, advice to check all steering and drive line components thoroughly, blahbitty blah blah...]
 
I'm wondering if somebody's adjusted the steering stoppers to allow more steering angle than factory. Strange. Got any extra slack in your driveshaft joints up front? Bolts on bottom of steering knuckle tight? Last repack on the front axle?

DougM
 
Sounds very similar to what happens on older mini-trucks when the bell cranks on the parking brake get rusted. Check the bell crank arms on the back inside of the rear wheels. With the parking brake off, they should be resting against the stops. Also check to see if you can move them back and forth by hand.

Might also be a good idea to pull the wheels and check the brake caliper attachment bolts.
 
I wonder if the VC is going. How's the turning radius?
 
I bet it is a binding in the t-case or in the birfield. I like the comment about someone adjusting the stops on the steering too far and causing the binding.

FYI, reverse, steering to one side locked, and up hill is the best way in the world to break birfields and sheer axle studs. It binds up the driveline and can pop things quickly.
 
Back
Top Bottom