Background help needed!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 11, 2019
Threads
2
Messages
13
Location
Syosset, NY
We acquired this 1976 FJ40 with an unknown history. What do I need to confirm what we have? We are looking to find out of this is a US version or imported from overseas. It was restored by someone, looks and ran great until a distributor (as i was told) problem developed. Can anyone here help? Maybe someone knows this particular vehicle. Any help would be greatly appreciated.

1976 Toyota FJ40.webp


1976 Toyota FJ40 frame.webp


1976 Toyota FJ40 engine.webp
 
Welcome to Mud!

If you post a few pics of your 40, we can give you more insight.

The easiest way to tell if it's a probable South American vehicle is no heater/blower.
 
No heater, bumper tits, split bench seat, and zero emissions stuff all scream South American 40.
 
Non US market. J30 is a three speed that ended in the US in early 73. Non heater is also non US. Power steering is not stock. The spare tire carrier is also from a later model. VIN shows production on your as 5/76.
 
Non US market. J30 is a three speed that ended in the US in early 73. Non heater is also non US. Power steering is not stock. The spare tire carrier is also from a later model. VIN shows production on your as 5/76.
Thank you - Since there are aftermarket items and pieced-together parts from unknown years/models, how will i know what distributor to get?
 
Mid 1976 2F based on engine number.
From here:
 
Thank you - Since there are aftermarket items and pieced-together parts from unknown years/models, how will i know what distributor to get?
Probably your best bet would be this one:

 
Does your carburetor have a vacuum advance port just off to the side (towards the front of the vehicle) of the idle mixture screw?

1573564721837.webp


BTW, photo courtesy Specter Off Road.
 
Probably your best bet would be this one:

Thank you, I'm looking into it.
 
The distributor runs the oil pump. It can get you spark without being engaged to the oil pump. It is hard to install because you need to align the oil pump with the tang of the distributor, but the camshaft gear makes the distributor shaft turn as it is installed. It is also hard to see that side of the motor without a mirror or removing the fender. It isn't a bad idea also getting a fresh distributor clamp, if you get a distributor, or remove your current one. Back in the day, I seized an engine not knowing the warning. Lucky for me, @4Cruisers bailed me out with a motor and got me back on the road.
 
​
We acquired this 1976 FJ40 with an unknown history. What do I need to confirm what we have? We are looking to find out of this is a US version or imported from overseas. It was restored by someone, looks and ran great until a distributor (as i was told) problem developed. Can anyone here help? Maybe someone knows this particular vehicle. Any help would be greatly appreciated.

View attachment 2130458

View attachment 2130459

View attachment 2130460


First Things First ,

WELCOME TO MUD Stuart ................................ !


:D


------------------------------------------------------------------------------------------------------------


Next up :

This is a Period Correct Reproduction

1976 Saudi. Spec. Region Destination Market

FJ43L-UC

DATA ID Plate

Take note : the similarities , J30 3 speed. Trans , 2F Engine , Trim Code L#11



DSCN9042.JPG



- Your Trucks Front Floor Mat is hand made in a little Shop in BOGOTA Columbia ,


-


​
 
Last edited:
Back
Top Bottom