For Sale Austin: Split case twin sticks, FJ60 back seat, for sale or trade for b pillars, driver side kick panel,

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

meatloaf

meatloaf

10 Year 15 Year 20 Year
Joined
Sep 1, 2004
Threads
493
Messages
3,410
Location
So. Austin, tx
Location
United States
I have a twin stick setup that I bought from Georg about 2 years ago, used it for 6 months and went back to stock. These were welded and heated/bent and will probably need to be re-bent since I am running 53L vortec & nv4500 with the split case and drivetrain sits forward than stock configuration

Rear seat of my 83 is stained and the seat part some sort of glue-like substance

I am in need of… for my 83 FJ60 brown interior:
both B pillars
driver side kick panel
defrost cable

DD6D2134-B64F-4731-8049-12E93A28942E.jpeg


A22FF5DF-7D4C-4361-984B-7D1D567FD077.jpeg


85E1575B-6B82-4C30-8FB2-9C6978C58C88.jpeg


46C69148-2A33-41D6-8073-1716E754DAAF.jpeg
 
Pm me a picture of where you want the B pillars cut, I think I might have them. I have a pile of parts that were already cut up when I got them and believe the b pillars are in that pile.
 
AJR said:
Pm me a picture of where you want the B pillars cut, I think I might have them. I have a pile of parts that were already cut up when I got them and believe the b pillars are in that pile.
Click to expand...

@AJR , thanks for the reply but I apologize for not being clear, I actually need the plastic trim on the inside in brown
 
meatloaf said:
@AJR , thanks for the reply but I apologize for not being clear, I actually need the plastic trim on the inside in brown
Click to expand...
Looking back, you did mention interior. I didn’t catch that. Sorry can’t help with any interior parts.
 
ATL Cruiser said:
Could you measure the seat base bottom? And also the thickness of the top cushion.
Click to expand...

@ATL Cruiser , not sure I understand your questions. lay them flat and measure thickness?
 
meatloaf said:
@ATL Cruiser , not sure I understand your questions. lay them flat and measure thickness?
Click to expand...
good to hear from you. Sorry for my lack of clarity. I already sourced a seat anyway. I will touch base if it doesn't work out.
 
Sorry it took me too long to reply and glad to hear you found one
 
The back seat in the picture above is free in case someone has one in worse shape and wants to take the time to clean it
 
You must log in or register to reply here.

Share this page

Back
Top Bottom