Aussie 80 with Aussie EFI V8

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 1, 2006
Threads
10
Messages
120
Location
Seville,Victoria,Australia
G'day, I have a 95 model FZJ80 with a 1FZ-E that was getting smokey due to valve guides,
Being a V8 fan I pulled the 6 out and fitted a Holden 5ltr EFI V8 out of a 95 Commodore. took about 6 weeks in spare time after work and in between jobs. Lifted it 4 inches and had LPgas fitted, It runs on 305/70X16 M/T Claws,
Runs well, lost low down torque but revs and sounds better then the 6.
Hope you like it.
Cammo.
012.jpg

Image009.jpg

Image041Small.jpg

Image014.jpg

Image016.jpg
 
Looks like you are using the Toyota transmission? Is it the A442, 443? What did you do about the electronics?
Rusty
 
Its not that common on 80's unless they were early 3f, as the 5.0 GMh engine only makes the same power and top end torque as the 4.5, but has air cleaner wrong side, and some front shaft clearance issues, which is an easier conversion, and we all know what power the 4.5 can make, for less than the conversion cost. ;)
 
Looks like you are using the Toyota transmission? Is it the A442, 443? What did you do about the electronics?
Rusty
The Toyota computer was thrown and replaced with the GMholden ECU, with tacho interface to correct V8-L6 tacho reading.
The box is orig 5 speed manual from the 8/95 FZJ80
What the differance between the A442 and 442?

Its not that common on 80's unless they were early 3f, as the 5.0 GMh engine only makes the same power and top end torque as the 4.5, but has air cleaner wrong side, and some front shaft clearance issues, which is an easier conversion, and we all know what power the 4.5 can make, for less than the conversion cost. ;)
Sorry Assassin, no drive shaft issuses as its lifted 4 inches and has a HQ V8 sump fitted to clear the diff housing. I could have rebuilt and made the 4.5ltr better, but I like to use the products that I sell and as a work advertising 4wd it stands out, plus as I said im a V8 fan:grinpimp:
I am planning down the track to stoke it to 355 and supercharge it.
vn-vt-holden-terra-kit-v8.jpg
 
Last edited:
There ya go,

Still like those front fenders ;)


I went the easy way, and bolted on a supercharger to the 95 model 4.5, I got second hand [V1 Vortech] and went with aftermarket computer.
 
Nice looking job! Will fuel use increase or decrease due to the V8 in one of these beasts. Love to sound of my 1HD-T and get decent fuel mileage so won't be doing anything like this soon - as well as the fact that I am not mechanical enough and also might have difficulty accessing parts. Or is there a very similar/same engine in the GM stable on our side of the world?
 
Nice looking job! Will fuel use increase or decrease due to the V8 in one of these beasts. Love to sound of my 1HD-T and get decent fuel mileage so won't be doing anything like this soon - as well as the fact that I am not mechanical enough and also might have difficulty accessing parts. Or is there a very similar/same engine in the GM stable on our side of the world?

305 chev would be the closest to what the 5.0 lt V8 here is.

A later engine would be ls1 or ls2.
 
I do love how holden makes the chevy lsx enginges look.
 
The Aussie Holden V8 isnt a chev, they were designed and built in Australia back in the 60's.
The LS1 had replaced the Holden engine in 1998

Sorry I missed the distributor in the pics and had thought it was a newer engine.
 
Back
Top Bottom