Parting Out Atlanta: RHD 1998 Toyota Land Cruiser VX Limited (Rollover Victim)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

cruiserpatch

cruiserpatch

Supporting Vendor
Joined
Nov 24, 2020
Threads
137
Messages
1,364
Location
Atlanta, Georgia
Website
www.cruiserpatch.com
Vehicle Model
  1. 100 Series
  2. LX470
Location
Atlanta, Georgia 30084 United States
Had a customer bring me his rolled '98 VX Limited that he wants the motor from.

77K original miles

4.7L V8-powered 4-speed auto

The body is pretty much toast. The LH rear door might be okay- it seems to be straight at least. Sunroof glass somehow did not break.

Also still parting out a '98 LX470

Body parts-
  • Hood is dented but useable
  • Fenders are damaged but may be salvageable
  • LH Rear door may have survived- hard to tell on a bent body
  • Sunroof glass survived
  • OE front mudflaps survived
Interior parts (grey/gray "stone")-
  • 2nd row SOLD
  • 1st row cloth seats (manual adjustment) - $800 for the pair
  • Door cards available
  • Window switches available

Let me know what you need. Make an offer. I'll probably accept it to clear some of this out

IMG_0427.webp


IMG_0426.webp


IMG_0424.webp


IMG_4434.webp


IMG_4442.webp
 
I see that both rear sliding windows are gone - I'm actually in need of the aluminum frames which are still present in the pictures. Even if they've got a bit of a twist, as long as they're not corroded inside (like mine) I can make them work.
 
KAYI said:
I see that both rear sliding windows are gone - I'm actually in need of the aluminum frames which are still present in the pictures. Even if they've got a bit of a twist, as long as they're not corroded inside (like mine) I can make them work.
Click to expand...
Can you send me a photo of exactly what you’re after?
 
I need the centre section of the sandwich, it's the aluminum frame. I could use the rubber runs which go over the frame but I can get by without them. It's the corroded aluminum that is the issue.

IMG_20260428_175845447_HDR.webp


IMG_20260429_095357705_HDR.webp
 
would it be possible to get the front left hand pillar, basically cut from top of windshield (where there is damage) down to just below the fender? I'm sure it's not "straight", but I think there may be enough of the inner structure in the area I need that is much straighter than mine that I can use to reinforce what I'm reshaping on mine. If nothing else, the skin is still much straighter than where mine is currently.

Rough cut I'm looking for:
1779122138899.webp
 
jaewastooshort said:
would it be possible to get the front left hand pillar, basically cut from top of windshield (where there is damage) down to just below the fender? I'm sure it's not "straight", but I think there may be enough of the inner structure in the area I need that is much straighter than mine that I can use to reinforce what I'm reshaping on mine. If nothing else, the skin is still much straighter than where mine is currently.

Rough cut I'm looking for:
View attachment 4142633
Click to expand...
I'll send you a PM with more photos
 
How is the automatic shift knob? Also interested in the steering wheel and drivers seat if you will split them up (really only need the seat cover, but am sure you probably don't want to just sell that!) Wouldn't mind coming to take a look at it to see if there are any other RHD parts I might need to stock pile.
 
Last edited:
GAbuildit said:
How is the automatic shift knob? Also interested in the steering wheel and drivers seat if you will split them up (really only need the seat cover, but am sure you probably don't want to just sell that!) Wouldn't mind coming to take a look at it to see if there are any other RHD parts I might need to stock pile.
Click to expand...
The RHD shift knob is mint (10/10). Steering wheel is a 7/10 and drivers seat is 10/10

Feel free to send me a PM and we can link up!
 
You must log in or register to reply here.

Share this page

Back
Top Bottom