Arizona Classifieds / For Sale / Wanted

[cartercd]

Replacing my 8 year old Cooper ST Maxx 255/85 R16 with a new set on Thursday July 28th. I am going to let Discount Tire dispose of them unless somebody wants them. 5 tires with tread depths of 5/32, 6/32, 8/32, 9/32, and 9/32. 23K miles on them with some tread chunking typical of wheeling in Arizona. I would only recommend these as an emergency spare given their age. $40 each in Chandler or could meet you somewhere in East Valley. PM if interested before Tuesday July 26th.

 

[jkl72-40]

I have a set of PowerStop Z36 Brakes for an 80 series. The 36 TRUCK & TOW BRAKE UPGRADE KIT goes for $480-$600 depending on outlet. The front kit was never installed and the rear were run for 10,000 miles, but I have since swapped back to 100% OEM parts. The rear pads are at about 50%, so I would suggest getting new pads to match up to the front. The rear rotors show normal wear and one has a groove where a pebble got caught.

$200 takes it all. Come get them out of my way.

View attachment 3059094

View attachment 3059095

View attachment 3059096

Pm sent

 

[ARJMN]

Pm sent

Answered

 

[centralworks]

SOLD

 

[jbee]

I have a 4/72 fj40. Looking for head for the original F engine, anyone have a spare laying around?

 

[Living in the Past]

I have a 4/72 fj40. Looking for head for the original F engine, anyone have a spare laying around?

What is the part number cast into the head?

Searching a previous thread from a few years back it appears mine is

=1972

=May 19th

Are the last five digits in the part number

 

[Honger]

I have a 4/72 fj40. Looking for head for the original F engine, anyone have a spare laying around?

I have an F head sitting outside on an F engine. Unknown status... can't turn the crank, could be head or bottom. It'd need some cleaning up and likely some machining. Yours if you want to come pull it. I can pull the valve cover and snag a few pics if you'd like. Hit me up in DM's with a phone number and we can chat/text.

 

[jbee]

What is the part number cast into the head?

Searching a previous thread from a few years back it appears mine is
View attachment 3080391
=1972
View attachment 3080393
=May 19th
View attachment 3080392
Are the last five digits in the part number

Thanks! I"ll get a photo tonight of my part number and we can compare!

 

[jbee]

I have an F head sitting outside on an F engine. Unknown status... can't turn the crank, could be head or bottom. It'd need some cleaning up and likely some machining. Yours if you want to come pull it. I can pull the valve cover and snag a few pics if you'd like. Hit me up in DM's with a phone number and we can chat/text.

Great! PM sent.

 

[jbee]

Thanks! I"ll get a photo tonight of my part number and we can compare!

Can’t get a good photo of the head part number without removing the valve cover, and I’ll saving that for the impending valve adjustment.

Build date is 4/72 and engine number falls squarely there. (See photos below) From toyodiy and partsouq that would make the cylinder head the 11101-60074 or -60075 or maybe -60076? One or more of these part numbers might supersede one or more of the others. Thanks for the help!

 

[Living in the Past]

Can’t get a good photo of the head part number without removing the valve cover, and I’ll saving that for the impending valve adjustment.

Build date is 4/72 and engine number falls squarely there. (See photos below) From toyodiy and partsouq that would make the cylinder head the 11101-60074 or -60075 or maybe -60076? One or more of these part numbers might supersede one or more of the others. Thanks for the help!
View attachment 3083553
View attachment 3083552

View attachment 3083551

The number you posted will not be the number cast in the cylinder head. That is a part number is for head as sold with plugs, bushings and seats I stalled. The head alone had a different part number but is no longer sold that way. Most of the loaded heads are NLA available but part number is still out there. What is cast on left side of your head?

 

[Highway Romping]

Jetboil Genesis Basecamp stove, used a few times. Too small for what I need. Both burners work great. One igniter stop working and the edge of the lid is slightly melted, I thought you can use it on the skillet but I was wrong.

-Sold

 

[ARJMN]

Jetboil Genesis Basecamp stove, used a few times. Too small for what I need. Both burners work great. One igniter stop working and the edge of the lid is slightly melted, I thought you can use it on the skillet but I was wrong. Asking $250.

View attachment 3084460

Chris,

Sending PM now.

 

[yosshaa]

Brand new in packaging never installed. compensate for sagging springs, add a little height to the rear for those carrying extra weight.
takes about 45 mins to install both sides. Selling it because I bought 2 sets and ended up not using these ones.

Rear Polyurethane Coil Spacer - 15mm Suited For Toyota 80 / 100 Series Land Cruiser/ Lexus LX450 / LX470
Produced from high-density injection molded polyurethane, allows fine
Package Details: Sold individually
Height 0.6" (15mm)

50/obo

View attachment 3006918

View attachment 3006919

View attachment 3006920

These are still for sale

 

[kdxman]

WANTED
80 series carpet, brown does not need to be in perfect condition.

 

[isthatalexus]

WANTED
80 series carpet, brown does not need to be in perfect condition.

I don't, but the 200 I bought came with these. May or may not be 80-Series, but if you like, you can have. These will preserve your future carpet.

 

[cruiserdan]

I don't, but the 200 I bought came with these. May or may not be 80-Series, but if you like, you can have. These will preserve your future carpet.

View attachment 3094876

Those are 200-specific. Not even close to an 80.

 

[isthatalexus]

Those are 200-specific. Not eve close to an 80.

Thank you for the note, @cruiserdan ! I think I've grown so accustomed to the full coverage of WeatherTech mats that these OEM ones did not look right. Mea culpa, I also did not look up whether these were for a 200.

 

[Living in the Past]

I don't, but the 200 I bought came with these. May or may not be 80-Series, but if you like, you can have. These will preserve your future carpet.

View attachment 3094876

Look like they will work in my FJ62 and do a good job on the back seat floor and cover the hump. Where are you in AZ?

 

[Living in the Past]

Thank you for the note, @cruiserdan ! I think I've grown so accustomed to the full coverage of WeatherTech mats that these OEM ones did not look right. Mea culpa, I also did not look up whether these were for a 200.

80 series are not even close to my FJ62. 100 series are a fair fit but rear mats do not cover the hump. This is primarily my driver around the cabin and gets used for a the utility work like hauling brush and work cutting. Looked a few times and do not find anyone making all weather mats or liner.