Arch moulding?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Dave 2000

Not all Land Rovers are useless!
Joined
Jan 24, 2009
Threads
71
Messages
4,559
Location
Spain
Hi all, waaaaay back someone was looking for the rubber moulding that goes between each of the four arches and body. Apparently they are quite pricey? But IIRC someone found a similar moulding that was again IIRC from another Toyota and was sold by the metre....yard?

I am in a hurry trying to get the 80 together for an up and coming trip, and having had the inner arch repaired and painted I need to fit the outer but the sun has destroyed the rubber, I am getting so pushed for time I see a careful application of black silicone coming up. :(

Thanks in advance.

regards

Dave
 
You are referring to the fender flair gasket?

Hi and thanks for the quick reply, yes that could well be the part. From a brit in Spain point of view, the body rear quarter has a 'flair' that has a rubber between the two parts.

regards

Dave
 
What color do you need?

I've got the following parts numbers, prices and notes for my white LC. As you can see in my notes my assumption is that you can just buy two extra front flare gaskets and then use them in the rear by cutting them to length but I've not tested/confirmed that. I don't know the parts numbers for these in colors other than white. The rubber bump spacers are on the front/lower edge of the front fender flares and space the bumper wings down from the flares a bit, should you be missing them and need them. You may also want to get new clips/hardware/etc. for your flares but can find all of that using the parts diagrams/etc.

Flare Trim
Front fender flare gaskets53852-60060-A04$60.005385260060A0 Toyota PAD, FRONT WHEEL OPENING EXTENSION, NO.1 Price: 15.01$, Weight: 0.037kg - PartSouq - Auto Parts Around the World PartSouq Auto Parts Around the World
Rear doors/quarter flare gaskets61794-60030-A00$0.00seems cheaper to just get extra fronts and trim them to lengthRear Fender Flare Seal No. 2 White 97-98 [61794-60050-A0] - $17.64 : CruiserParts.net, Toyota Landcruiser Parts
Vertical edges where rear flares meet61787-600112$10.00black on all vehicles
rubber bump spacer90541-120112$4.00same on back seats and flare end90541-12011 - Toyota Parts Deal
 
 
Hi Ian long time no chat.

Thanks for the offer mate, I need them sometime last week, so will try somewhere closer to me.

Many thanks.

Not me selling them, but I had come across this option a while back.
 
Trim - loc
only available in black

~$25 for all four and more adhesive contact than factory and easier to fit

Looks like they have a whole bunch of different products, and chance you could link to what you used?
 
Trim - loc
only available in black

~$25 for all four and more adhesive contact than factory and easier to fit


Thanks for that Phil, US company I assume? Would you have a link to their catalogue?

regards

Dave
 
Back
Top Bottom