ARB rubber bumperettes

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 30, 2003
Threads
123
Messages
1,716
Location
LA, CA
Hi Guys,

Just got my ARB bullbar and OME 850/860 installed today and I'm blown away at the suspension difference compared to my LX's way-too-soft stock suspension- the ride/handling are both vastly improved with these springs and N73/74 shocks (+caster correction and OME steering stabilizer). Will post pics soon.

Anyway, in addition to adding shackle mounts to the ARB, I was wondering if anyone has added rubber bumperettes to the front of the bar? If so, please post details.
 
Whats a shackle mount?
Do you mean a recovery hook so you can get snatched out?
Get ARB diff locks instead.
 
MoJ said:
$99????
:eek:
:frown:
It never ends.

$99 / PAIR and they're pretty damn beefy! ;)
 
alaskacruiser said:
$99 / PAIR and they're pretty damn beefy! ;)

Go to any farm supply/tractor store and get some D-rings...ARB bumpers have those mounts on the front just put these on and you are golden.


They look like this....and are cheap...
207d.jpg
 
FJBen said:
Go to any farm supply/tractor store and get some D-rings...ARB bumpers have those mounts on the front just put these on and you are golden.


They look like this....and are cheap...
207d.jpg

Just make sure no one is in the way when those rediculous holes rip out and that D ring comes flying off at light speed. I don't know what ARB was thinking with those, but not recovery.

-Spike
 
These look pretty good- they have a backplate so you dont pull the bolts thru
$45ea. expeditionexchange has them
DSC05441340.jpg


Also search for pix of AMMO's ARB front bumper, he has 2 nice points bolted on the front.

ARB bumper points are for the hi-lift, not recovery
HILIFT.jpg
 
FJBen said:
Go to any farm supply/tractor store and get some D-rings...ARB bumpers have those mounts on the front just put these on and you are golden.


They look like this....and are cheap...
207d.jpg

FJBen- Spike and FirstToy beat me to it, but they're right. Those are *not* recovery points, they are for a high-lift jack. If you are using those as recovery points, you are putting your/others' safety at risk.
 
Well I did think they looked a bit on the thin side...:grinpimp:

that is the good thing about this board...:beer:

what about creating your own for a WHOLE hell of a lot cheaper...3/4" steel, drill hole, weld to plate, sandwich bumper...done?

safe enough? or would you need more frame support?
 
FirstToy said:
ARB bumper points are for the hi-lift, not recovery

Hahahahah....now you tell me. AFTER I extracted about 30 vehicles out of mud, snow and sand, including one Z-71 that was not even running and stuck in Park at the time. I am sure glad I sold that truck/bar and got a new one. Hey Kaderabek....your Hi-Lift jacking points are weak. :flipoff2:
 
well that too :D but, supposedly you can toast your drivetrain if you pull in reverse because the gears are weaker in reverse. somebody long ago had it happen iirc. can't recall why, just remember all the foofaraw and made a mental note to yank from the back.
 
semlin said:
well that too :D but, supposedly you can toast your drivetrain if you pull in reverse because the gears are weaker in reverse. somebody long ago had it happen iirc. can't recall why, just remember all the foofaraw and made a mental note to yank from the back.

Hmmmmm. Hey Kaderabek, your drivetrain is weak. :flipoff2:

Seriously, that may be the case, and I fully understand why people are against pulling in reverse. But that truck (now Todd's) weighs in at about 6200 lbs and a slow gentle tug in reverse coupled with the stump-pulling torque of that blower and all that frontal weight can move mountains without slipping the tires.
 
Great timing - I have also heard the horror stories of using those for recovery points, but earlier this week I was in the library perusing the December issue of Australian 4WD and in their article on using a snatch block, they have 3 very clear shots of a troopie using those holes for recovery. The holes look exactly like the ones on the 80 bull bar. I was going to contact ARB USA next week for clarification. I will let you know their response.
 
LoneStar said:
Great timing - I have also heard the horror stories of using those for recovery points, but earlier this week I was in the library perusing the December issue of Australian 4WD and in their article on using a snatch block, they have 3 very clear shots of a troopie using those holes for recovery. The holes look exactly like the ones on the 80 bull bar. I was going to contact ARB USA next week for clarification. I will let you know their response.

Does anyone here have any direct experience with one of them tearing loose?
 
I have seen a couple of them pretty well beat up and bent. I don't recall seeing one torn out completely.
 
I called ARB USA and they referred to the holes as "recovery points". The guy I spoke with said they are fine for a "relatively" straight pull. He said the holes were not designed for side pulls and could possibly bend if missused.
 
Alaska,
I also just went up on the OME 850/860 combo.
Very happy with the stance rides great.
Seems we are both glad we went that route.
I think those pics you posted look like recovery points to bolt on the back.
As to the ARB recovery points
Bend but no tear out. Thats good.
Pulling in reverse, hmm, thats a no no
 
Back
Top Bottom