Another stupid question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Alright I'll try to say what I meant a little more clearly.

Rocknroll said:
Don't get me wrong, I love my 40 but i will not be changing everything out on it either.

My rig is "modified" to use the definitions stated above. Currently has lift and 35's. Will soon have winch, Aussie in rear, different seats and who knows what else, maybe 2f, front discs, ps, ac. But its Toyota for the most part and I intend to keep it that way. Again I really do love this thing and think it is the best machine for what I want to do with it (mountain trails mainly). I don't see a need to change out the axles, tc, tranny, and I'm sure not putting in a chevy! (long anti-chevy story)

Maybe I'm not jumping enough boulders or abusing it enough to appreciate replacing stuff. To each his own.

Make no mistake, I am a cruiserhead for life and will be happy to hang out here as long as I'm welcome.

my .02 may only be worth .01
 
In my opinion, out of the box the 40 is one of the best 4x4 vehicles out there. How many 4x4's came out of the factory with a PTO and later a Warn winch as a factory option.

Now mods on the other hand has nothing to do with the durablity....it has everything to do with trying to make the vehicle do stuff it was never designed to do. Who would thought that super huge tires was going to be the norm for some folks these days. I think if you did not mod your cruiser at this point you will be breaking parts. And You also have to remember production on fj40's was stopped in the earler eighties in Canada and the USA. And many years after they stop making them.......they still seem to out preform the "newer" and supposedly better compition. Even the Rubicon has issues.

About the only issue I have with the fj40 was the steering system they chose. It has to many parts in my opinion. That's my 2 cents and then some.:)
 
Last edited:
Maybe a better way to express my feelings is this stupid question.
Is a heavily modified, chevy powered, atlas tc'd, dana axled rig still a toyota land cruiser?

This whole thread philosophical and not meant to p*** anyone off. I'm one of you i promise!
 
that goes back to that the FJ40 was the best at that time. A chevy motor is more powerful but is not more reliable. The reason why people go with chevy over a toyota motor is the price. I love my toyota stock motor.
 
I think you have a point about many non-Cruiser parts mods changing the character of a FJ, Rocknroll. I think V8 conversions ruin the front traction from less weight over the front axle, but I'm glad many convert to V8 because there probably would already be a major shortage of 2Fs otherwise. I may need one one day. :D

Different trannys & xfer cases were usually installed because the Cruiser 3-speed, H42, and 3-speed & 4-speed transfer cases lacked adequate low gearing. So does a still stock split case, for that matter. That was one of the Cruisers shortcomings compared to granny geared T18/T19s in heeps. Of course, only the D300 had a barely adequate low range ratio. Until the Rubicon TJ, nearly all 4x4s have come with poor low range ratios, but 3-spd & 4-spd FJs fared worse for the lack of a granny gear. The SM420 swap (and more recently, the SM465) was probably the only solution that retained the Cruiser xfer case. Now available H41s and the Orion ended the need for domestic trannys. Didn't end personal preferences, though.

The birfields weakness needs no explanation, but the rear axle is tough, as are both f&r thirdmembers (fine-spline pinion 3rds even more so), so just locking the rear of an FJ could stave most birfield breakage and still make an FJ very capable. Now, chromoly birfs end the traditional front axle weak point.

Today is the best time to retain Cruiser style parts behind an F/2F/3F when making drivetrain mods as needed: Add an H41 or H55F, an Orion or split case with low range gearset, fine-spline pinion thirds, chromoly Longfields and inner axles, doweled/arb Aisin hubs, and maybe a FF rear (though not really necessary) and you'll have one tough rig. If only Marlin adds the 6-bolt knuckle, we *mod purists* will be set. [j/k about the *purist*:grinpimp:]
 
Wow...what a thread. I have basically a stock cruiser and absolutely love it. There is no need for me to put a SB Chevy in it or do anything more to it to make it "bad a*s"; it's already there.

Best Regards,
 
I'm not a wheeler. I have just always wanted a vehicle that I could really work on myself...something I could make better than it was the day I bought it. I've always been a sports car person and I lucked into an '88 Porsche 911 in '97 that had 6800 miles on it. It doesn't need any work. And it's still too complicated for me (in shop class in HS we tore down and re-built a lawn mower engine...that's the extent of my motorized mechanical experience).

I grew up in a ski area in CO and one of my dad's best friends had an FJ40. I always thought it was sooo much cooler than my dad's Scout. So when I finally got motivated to buy a restoration project I decided that instead of an old Mercedes, Jag, 914, or 2002 I would get an FJ40.

So, for me, the LC makes perfect sense. It's unique, people think its cool, and is absolutely something that I could work on. Plus it reminds me of my dad.

Of course, now that I have it up on jack stands we'll see if I can actually make it road worthy again or just make it worse...:flipoff2:
 
Back
Top Bottom