ANOTHER MFD THREAD?!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 9, 2017
Threads
8
Messages
20
Location
Annapolis, MD
Alright, Mud. I can’t take it anymore. I’ve been living without my Multi-function display since the winter. Thankfully the heating and ac are the only things I still have. Well that and trip info. I’ve read that pin-60 is the cause for most MFD issues so I pulled the unit and soldered that pin despite the fact that it looked fine.

So I’m without radio, backup camera, nav, and rear DVD. When any of the respective buttons are pushed, I get the message “the external system is not connected” except for audio which just shows the “audio off” screen.

I can’t afford to buy a new unit, and my 100 is my daily driver, so sending the unit out is not an option. I haven’t seen anyone else who was left with nothing else but trip info and hvac, hopefully someone else can give me some insight. That is, before I gut the audio system and add a proprietary Bluetooth head unit into the center console. Thank you for any input.
 
When I was replacing my screen and broke a connector on the video board I had to buy a used unit.
$550 from a fellow MUD member.
I have no other help to offer other than to look for a used unit.

The price of ripping out the old and going totally different is going to cost at least that.
 
When I was replacing my screen and broke a connector on the video board I had to buy a used unit.
$550 from a fellow MUD member.
I have no other help to offer other than to look for a used unit.

The price of ripping out the old and going totally different is going to cost at least that.

Yeah, that’s what I’ve been afraid of. I’d like to have a reverse camera again, nav is outdated so my phone works much better, and the HVAC works so I’d probably just have a stand-alone audio system with a Bluetooth receiver in the center console so that I never have to touch it again. E

I may be willing to sell mine as I did a nav delete on mine.

My old set up will allow you to move your old nav and put in an after market on the old location. I will include all wiring etc. here is my build thread:

Successfully Moved Navigation Screen To Make Room Pioneer AVIC-8200

So at this point would it be plug and play? Idk, this seems like waaaay more work than i was looking for. I’m down to repair some solder connections or a faulty wire or burnt connector, this seems like some real work to make work lol.
 
Back
Top Bottom