Another Bilstein 7100 thread.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Thanks guys!

I purchased the 90's @ a hydraulic hose shop, I also bagged some 45's justin.
Ya I cant wait to do the rears! I have the usds figured out , but still not sure on usps.

Im leaving to go wheeling right now!..............

ken
 
Sweet, let us know how your second trip out was!

I'm at the very begining stages of a 4" Slee and 7100 install myself. I was wondering about a 90* elbow on the shock end, but it looks perfect on the resevior side too. Nice work!
 
Sweet, let us know how your second trip out was!

I'm at the very begining stages of a 4" Slee and 7100 install myself. I was wondering about a 90* elbow on the shock end, but it looks perfect on the resevior side too. Nice work!



Went wheeling... Have report....


Well I am definitely digging the 7100's , I did notice off road that they were a little more firm at first impact, That being said they were way more controlled overall.
The rear is still OME and is pissing me off. :crybaby:
Note: I am light in the front**
The on road handling so far is the shinning star.
Im hoping this weekend to complete the mod.





ken
 
nice! time to ditch those booty emulsion shocks for good! :grinpimp:
Rick said he really liked the 7100's offroad performance... I can't wait to trail test mine!!

look fwd to the rears- I want to do the 90's also, I think it may solve the hose rubbing issues! Great stuff
 
bumpin' you Ken, the 90's did the trick and curious to see what you did at the rear. W/ the 90 fittings, frame mounting at the crossmember looks to be pretty easy. They fit fine it seems on the shock body tho... :cheers:
 
Got my wheeling on and im totally stoked!

Flex AHOY! maybe too much (I still need to bump stop spacer)

The guys behind me were freaking out on the crazy flex.
Unfortunatly I only took one poser shot.
The rear mounts are working great , the bottom mount is like the James Gang. I might end up doing something like Clown on the lower mount.


After I installed the rear's I took the same test drive as above (post)
HUGE! difference When cornering the rear would hook up like a ski in a carve.
and when taken on the ruff road the whole truck floated over the crud . :)

:cheers:
ken
P1010002.webp
P1010004.webp
 
Schaweeet! Sounds like a nice ride. So just to find out a bit more detail on your rears, in that pic did you flip the upper rear mounts so the shocks mount under the hole? And then you did the eye to eye adapter on the lower rear mount? And you've got the 12" short bodys right?

My 7100's are arriving on the 12th according to UPS... I'm thinking of flipping my top rear mount but then hacking off the lower rear mount and welding on a 1/2" bolt, but we'll see. Can't wait...
 
Schaweeet! Sounds like a nice ride. So just to find out a bit more detail on your rears, in that pic did you flip the upper rear mounts so the shocks mount under the hole? And then you did the eye to eye adapter on the lower rear mount? And you've got the 12" short bodys right?

My 7100's are arriving on the 12th according to UPS... I'm thinking of flipping my top rear mount but then hacking off the lower rear mount and welding on a 1/2" bolt, but we'll see. Can't wait...




I ended up making new brackets that mount under the hole , much like the James gang.
Yes the lower mount is a round tubing with the 2" channel peice.
And another yes they are the 12" shock.

Cool, post the pics when you get to it.

ken
P1010001.webp
P1010002.webp
P1010003.webp
 
Ken,

Hows the vibration through the hiem joints? Is it noticable? Sounds like you took care of it in the rear on the frame, but just wondering if there would be a way to aleviate some of this in the front by putting a thin polyurethane bushing on either side of the frame mount.
 
I wish I had more experience with this to give a definitive answer.
I will go ahead and say the ride is nice but I do think it would be a little more "smooth" with out the hiems.
Right now Im running a piece of poly in the front @ the top stud mount.
I dont have any poly in the rear @ this time.
I now have the correct bushings from Mirage in Santee (great guys over there) (ORW are boneheads)
Soo I will be installing the bushings soon , I might end up doing top and bottom.

I have Ken's new fly cc plates , so that will be a good time to go back in there.



I wish I had more flex shots to share , because it does the business now! :cool:


ken


Ken,

Hows the vibration through the hiem joints? Is it noticable? Sounds like you took care of it in the rear on the frame, but just wondering if there would be a way to aleviate some of this in the front by putting a thin polyurethane bushing on either side of the frame mount.
 
A little update:

I drilled out some bushings and gained 1 3/4" of up travel.

Im not sure if this will be a long term fix but I will find out.
One thing that I dont have yet is , the aft washer for the bushings.


We'll see...

ken
P1010026.webp
 
Nice job dude. I did the same as you, but used the Sway bar end link bushings found in most autozones. These are poly and seem to last a long time.
 
Back
Top Bottom