Alternator wiring

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 7, 2014
Threads
130
Messages
1,004
Location
Lancaster, CA
Hey guys, has anyone had this type of connector on their alternator? Are you supposed to just plug in a spade terminal or is there a pigtail for this?

7AE364B7-0F57-4CD1-AE8B-5ADFD3FA9E41.webp
 
What year FJ40 are we working on here?
Is that an OEM replacement alternator?
What does your alternator harness have for a connector on the end?
Is the connector shown in your pic a connector coming off the alternator? If so what does the other end plug into? Show us a pic of that.

I have the mating female connector for the male connector you show, but until I know what you have I really don't know what to tell you...
 
I'm working on a 66 45 with a 78 2F. The alternator is a reman Delco for Nippondenso. AC Delco part number 3341599. The connector comes of of the alternator and is about 4 inches long. There is a red and black wire on the pigtail. I'm at work right now, but I'll add another picture of the end of that pigtail when I get home.
Here's a link from Rock Auto of the alternator: https://www.rockauto.com/en/moreinfo.php?pk=1001535&cc=1276523&jsn=371
It shows the same connector, but not on a wire like I have. Also, my alternator does not any letters on it like this picture shows.
 
OK I see now. Yes I have the connector you need. Part # 297987 $12.95 and comes with two terminals. FYI That is an internally regulated alternator so no need for a regulator. What wiring harness are you going to use for this truck? The 2F engine of course has the alternator on the opposite side compared to the OEM 1F. Some wiring changes will need to be made to the 66 harness to make it work with this alternator.
 
I'm actually putting in a new EZ harness with a Dakota Digital cluster. The original harness was pretty hacked up so I pulled it all out and went with the EZ. It was suggested that I go with an internal regulated alt by another mudder so I picked what Rock Auto had listed for an 85 FJ60. I actually have a few questions about that EZ harness with regards to wiring up the alternator, coil, and dizzy. I'll take the connector you have. Should I send you a PM?
 
This is my alt

3E73A436-6134-4BC8-B915-77E3A179BF08.webp
 
Can you pull the rotor button off, and remove the metal plate under it then take a pic? That sure looks like a points distributor to me.
If it's the points distributor you will need to identify which model it is so you will know what igniter/coil to use. Clean it up, there will be a sticker on it with a the Model # like the pic below.
19100_611080.webp
 
In post #7, that's not the alt.
It is a stock 1966 points dissy.

The alt in the background of post/pic #1 is not the same as the alleged AC delco reman unit referenced in post #3.
The rockauto link does show an OEM Denso FJ60 alternator.
 
Doh! I had dizzy's and alt's on my mind last night and I got the terms mixed up. Then I forgot to take a pic of the alternator where that plug goes. I'll get those other pics posted later on today. Thanx again for the help!
 
Thanks for the info Jim, I thought it was a points dizzy.
Your parts are on the way. I included a ring terminal and rubber boot for the alternator B+ connection as I know the EZwire harness will not provide such things. You will only need one wire going to the two pin alternator connector. It will need to be a key switched +12V wire from the EzWire harness and will connect to the terminal in the pic below labeled IG. The other terminal is used for a charge indicator light. If you plan to have a charge light I can provide instructions on how to wire it.
IMG_1025.jpg
 
Jim,
I'm guessing Rock Auto is using a generic picture for their site? I'll take a better picture of it when I get home.
thanx
Craig
 
On the EZ harness, what is the white wire, alternator exciter I believe it says, for? I also have another alternator I got with the truck that's in a box. I'll post some pics of that as well and hopefully you guys can tell me what I have.
 
Ok, so I got everything wired up and go to turn the key....I hear a couple of clicks and nothing happens. When I try to turn the key again there are no clicks. Just dead silence. I checked all the fuses and everything is good. It did start last fall before I moved it into the garage and took out all the wiring?
 
Bad battery....fired right up with a new one. Thanx again everyone for your assistance!
 
Back
Top Bottom