Alignment Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2004
Threads
38
Messages
121
Hello Everyone,

I have an alignment question. I went down to my local firestone today and got an alignment on 1993 LC. The guy total be since the truck has a lot of miles i may need to replace the control arms. Any feeback or suggestion would be helpful and truck has almost 300,000 miles. Thanks


**Here are the before computer reading..

Front Left Camber 0.2 Caster 4.4 Toe 0.37 SAI 14.6 Included Angle 14.8
Front Right Camber 0.2 Caster 3.4 Toe -0.17 SAI 12.8 Included Angle 13.0
Cross Camber 0.00
Cross Caster 1.0
Total Toe 0.20

**Here are the after computer reading..

Front Left Camber 0.2 Caster 4.4 Toe 0.09 SAI 14.6 Included Angle 14.8
Front Right Camber 0.2 Caster 3.4 Toe 0.11 SAI 12.8 Included Angle 13.0
Cross Camber 0.00
Cross Caster 1.0
Total Toe 0.20
 
O.K. so by the above readings they only changed toe in the alignment (common with out adjustable panhard rods from a lift) so what made them think the control arms are bad, do they pop when you turn? If not the only "control arms on the 80's run front to back to let the axle move up and down not side to side, which would affect alignments. Kinda sounds like they were trying to make money on you. Sad to say that, I'm in the industry. But all industries have good and bad people. If you are really concerned about it go to the dealership and ask them to insepect the suspension because you think a different shop is tryin to rip you off let them now about the alignment and what the other shop thought. They should be good to you, the only rigs these guy see are Toyota's.
 
O.K. so by the above readings they only changed toe in the alignment (common with out adjustable panhard rods from a lift) so what made them think the control arms are bad, do they pop when you turn? If not the only "control arms on the 80's run front to back to let the axle move up and down not side to side, which would affect alignments. Kinda sounds like they were trying to make money on you. Sad to say that, I'm in the industry. But all industries have good and bad people. If you are really concerned about it go to the dealership and ask them to insepect the suspension because you think a different shop is tryin to rip you off let them now about the alignment and what the other shop thought. They should be good to you, the only rigs these guy see are Toyota's.

no poping @ all and had the feeling this was 1st time this guy every did an alignment on a LC....
 
O.K. so by the above readings they only changed toe in the alignment (common with out adjustable panhard rods from a lift)

Adjustable panhard rods will only shift your steering box (and steering wheel) slightly off center when centralizing axles after a lift (correctable), they shouldn't even be touched in a wheel alignment once they are set correctly.


montelawrence,

Make sure you rule out all wearing components before having an alignment done - tires, bearings, all bushes. etc. Cambers can be corrected with offset swivel hub bearings, casters with offset control arm bushes or a different shape arm.
 
Adjustable panhard rods will only shift your steering box (and steering wheel) slightly off center when centralizing axles after a lift (correctable), they shouldn't even be touched in a wheel alignment once they are set correctly.


montelawrence,

Make sure you rule out all wearing components before having an alignment done - tires, bearings, all bushes. etc. Cambers can be corrected with offset swivel hub bearings, casters with offset control arm bushes or a different shape arm.

ok, thanks james
 
What James said is true about not having to adjust panhards -once they are adjusted correctly, but how do we know they ever were? Thats why I said if the truck did have adjustments on these bars, which now we know it doesn't, I whould make sure the shop you take it to is willing to dial these in as part of the alignment. Not uncommon for techs to get lazy and only adjust toe. Also the shop should tell you if any wearable suspension components need to be replaced due to play/wear.

If your rig is pulling to the right, adjusting toe will not fix this. Toe will only affect the steering wheel being centered and tire wear (main reason for alignments). A pull can be caused by anything from a bent suspension component to tire pull. None of these will be affected by changing toe. Hope this info helps.
 
Back
Top Bottom