airing down

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 25, 2007
Threads
326
Messages
5,181
Location
Nashville
Hey all,
Dont see many posts about this, but what is a good psi for a truck off road without on-board air. Is it necessary to be aired way down, for I have never tried it, having no compressor. I am going on a trip tomorrow and just wondering if it is worth it to go down to 25 psi or not, or to go down to something in the middle that is still ok for the road until I get back up to a gas station. This also might be a ridiculous question, but I thought I would throw it out there...

cheers,
Joel
 
My firestone destinaton M/T tires completely suck in the mud until you get to about 18 PSI. Then, they rock.

How much you need to air down will depend on the load rating of your tires and the terrain you are on. Yes, it makes a difference in traction.
 
I am somewhat new to the forum but I always aired down to about 16-18 psi on my old H**P which is a much lighter vehicle. I was running 35" TSL's and they wandered a bit on the road but I never had any trouble. Definately makes for a much smoother ride on the trail!

Where are you guys riding? We should get together for a ride around Livingston, TN this Spring, we have some great trails around that area.

Curt
 
I am riding with a fj cruiser group, only 80 there :hhmm:... I suppose that if I aired down to 20 psi it would help traction, then air back up at the station by the interstate. Yeah, man, the tennessee crew needs to get a trail ride. I am looking at going to the local STLCA meeting soon...

Joel
 
Air down until the sidewall squats a good bit. The lower, the better unless it's just mud wheeling. I've driven 20 miles on my tires at 10 psi at 60 mph. They can handle a little road time aired down.
 
FWIW - I've aired down to 15 on the Oceano Dunes and 18-20 on trails/mild rock gardens w/o issue running 33's. As has been said, it depends on your terrain.
 
How long is a piece of string?

Terrain, vehicle weight, sidewall flex, load rating are all factors to consider when dropping pressure below street levels. If you don't have the capacity to air back up, then start on the high side and drop pressure by 1-2 psi at a time until it feels right. With my 36" Swampers I run 9-11 psi depending on what I'm doing.
 
T'80,

It sounds like you're gaining experience as you go which is very cool. One of the first things I taught my two boys when we first started going out was how much difference tire pressure has on traction.

We started out on a particular road at street pressure, then aired down in increments of 5, 3 and eventually 2 psi, ending up at about 15 psi from 32. Ultimately they could feel a difference in the traction and ride on a rough uphill road. A lot less slippage and smoother ride at the low pressure.

It's been said here, but rigs, tires and road conditions all make a difference and setting a good pressure is a bit of an art and personal preference, and to some extent taking the risk of sidewall damage or unseating the bead.

Were I you, I would keep close to street pressure unless I really needed extra traction, but then get either a compressor or a CO2 tank to take with you. That's why it's addictive! Curiosity and the toys to answer the questions that get asked.

Have fun out there. Dan.
 
Your 80 is probably lighter than mine, but I like the number 18. It's the magic carpet ride.

Agreed. I've got my 'automatic air-down thingies' set at 18. And there's not many heavier than me I'll bet!
 
Two weeks ago we were on a snow run. There was a guy in a 60 with probably 35" tires, brand new. He was really sucking wind at 32PSI - couldn't go anywhere. Aired it down to the neighborhood of 18PSI and it walked over everything.

On my 285s I'll typically go down to about 20-22 PSI if I don't think air might be readily available at the end. Then I carry one of those 5 gallon air tanks - that's good for about 5PSI/tire.

I've got a york & assorted parts sitting in the shop though, so no more screwing around, once I find time to put it together.
 
I am riding with a fj cruiser group, only 80 there :hhmm:... I suppose that if I aired down to 20 psi it would help traction, then air back up at the station by the interstate. Yeah, man, the tennessee crew needs to get a trail ride. I am looking at going to the local STLCA meeting soon...Joel


Where you heading to......?

Make a meeting......:p
 
10 psi at 50mph+ speeds on the road is dangerously bad juju.

I have run my 285 Revos down to 8 psi in the snow and never lost a bead. Probably on borrowed time after that comment, but I don't wheel very hard. I really don't notice much difference in the snow until about 15 psi, then an even bigger difference below 10 psi. In mixed trail driving, I usually go to about 20 psi and start from there.
 
I am riding with a fj cruiser group, only 80 there :hhmm:... I suppose that if I aired down to 20 psi it would help traction, then air back up at the station by the interstate. Yeah, man, the tennessee crew needs to get a trail ride. I am looking at going to the local STLCA meeting soon...

Joel

Everyone that goes off-road should plan to air-down at the trailhead (psi varies as others have explained) and everyone should plan to air-up before they hit pavement. You can buy a decent 12v air compressor at Costco (or comparable) for ~$50. These are not "cig lighter" type of compressors and draw a lot of amps so plan to clip them directly to your battery and leave the engine running while you air up.

The ride and traction improves dramatically when you are aired down.

Tools-R-Us did a write up on his 12V DC Puma. They pop up frequently on eBay for $200 or less. If you are planning a full OBA system then this is the way to go. You can split the tank from the compressor. The compressor is very high-output.

1a_1_b.JPG



-B-
 
Last edited:
Here is what I said in a previous thread on this topic:

Since this is very specific to your particular tire and vehicle, I recommend developing a footprint versus pressure curve. I air up to full pressure and measure the tire footprint. I then deflate 5 psi and measure again, repeating the process down to 10 psi. I then plot a footprint versus pressure curve.

You will observe that the width of the footprint is relatively constant, but the length increases. You will also observe that the curve is not linear. Here are the results from my 285 Revos on a relatively stock weight truck.

Pressure/Area/% increase in area
40/ 82.0/ -
35/ 82.6/ 1%
30/ 85.9/ 5%
25/ 92.8/ 13%
20/ 102.0/ 24%
15/ 108.0/ 32%
10/ 127.7/ 56%

So for me airing down by 10 psi only increases the footprint 5% (negligible), but the next 10 psi really starts producing results. I use this table as a guide based on the type of terrain I'm in and the traction I need. Keep in mind that you increase the risk of breaking a bead at very low pressures. Also, most tire pressure gauges aren't that accurate at low pressures, so having a low pressure gauge is a good idea.

I would not recommend driving at highway speeds with anything less than the recommended street pressure. The heat buildup will increase the risk of disaster.
 
Back
Top Bottom