Adjustable castor bushes.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 9, 2007
Threads
108
Messages
622
Location
Asturias(Spain)-London(England)
Website
www.sybaris-expediciones.com
I've been offered this: Ironman 4x4 Suspension - Suspension U-Bolts

Have any of you tried something similar, does it look good¿

Would the 3.5 degree position be enough for a 3" lift?, How many degrees has the OME caster kit?
 
So, if I understood how this castor thing works, in your case with 2.5" lift, you would be ok with a correction between 3* and 5*.

3.5* would be fine for my 3" lift then, wouldn't it?

So OME bushings are only enough for very small lifts, aren't they?

I know I should take the car to a steering specialist to measure the caster, but it's hard to find one where I live. I took it to a place that makes suspension and steering adjustments and they didn't even know what I was talking about. They looked at the 80 like it was an UFO or something. They are just used to work on sports or road cars like BMW or something like that.
 
Yep you got it. Sounds like you'll be pretty safe with that setup getting back to spec. It hard to say cause each trucks different, but I really can't make it worse ;). I dont have any knowledge on the adjustable caster in your first post.
 
I think to get this Ironman and adjust it to 3.5* is my best bet. OME is not enough and to get Slee's I'd have to pay shipping from the US and customs.

Anyway, what I worry about now is the reliability of this adjustable bushes. It looks to me that they can't be as tough as OME's or Slee's one-piece bush. What do you think? Am I just a bit paranoic?

Do the castor bushes have to deal with hard loads or movements that they need to be specially tough?
 
Landtank - While on the topic, Ive haven't heard much of the rubber ones. OME and Slee's are Poly I believe. Like in the link are the rubber bushings better like they state.

Guess what is your opinion of them? (I assume good seeing you'll be using them on something)
 
Damn, I just ordered the slee 3* bushings. Those both look like an option. The iron man bushing are intriguing since they are "easy fit". Does that mean they don't need to be pressed in? Will they be tight enough and will it be possible for them to rotate out of adjustment? Looks to good to be true.
 
Damn, I just ordered the slee 3* bushings. Those both look like an option. The iron man bushing are intriguing since they are "easy fit". Does that mean they don't need to be pressed in? Will they be tight enough and will it be possible for them to rotate out of adjustment? Looks to good to be true.

I wouldn't kick yourself to much. I installed Slee's and really like them.
 
Yep. I tore up a set of ome poly bushes on a long tough mountain climb fully loaded. The rubber ones should have less vibration too. I'd love to know how they hold up.
 
Back
Top Bottom