AC compressor noise

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 15, 2007
Threads
3
Messages
11
Location
Edisto Island SC
Website
www.discoveredisto.com
Just picked up my 93 from the dealer and when I hit the AC a horrible squeeking noise started. Air was cold but I called the tech over and he said that the compressor was on the way out. Does that sound right? Not that I don't trust the service guys but I guessing a new compressor is going to cost big bucks. I should have asked what it would cost but I thought I would check here first to see if a squeeking compressor means a dying compressor. thanks
 
I remeber when I first got my 80 I had the same problem. The a/c compressor was making noises as if there was little lubrication. The truck had been sitting for 3 years and so I took it to a friend of mine who worked at toyota and he told me there was a 50 percent chance that evacuating the system and adding new refrigerant with oil will fix it, otherwise it was shot. I told him to try to evacuate it, add oil, and refill he did and it has worked like new ever since. I really have to give credit to toyota for making a very durable a/c compressor, it really sounded like it was dead.
 
thanks for the quick post. I will try that first for sure.
Howdy! It could also be just the belt. Does it make noise just on startup, or does it continue when the compressor runs?? John
 
Could be a bunch of things; overcharged, bad and/or miss adjusted belt, idler pulley going bad, clutch and/or clutch bearing going bad, compressor going, etc

Most of the time compressors don't make horrible squeaking noises. When going bad they usually grumble and cooling is usually reduced before they get very loud. Most screeching sounds are belt, clutch, idler related, with the idler being the most often problem and cheapest to repair.
 
My compressor made more of a knocking noise before it crapped out.
 
Belts are new, only does it when ac is turned on. Air is still cold


So...you are saying ONLY "at start up" does it make the squealing noise...right?

Once the compressor clutch is engaged for awhile the noise stops?

Here is what all of us are trying to determine:

* Do you have all OEM belts (it makes a difference)?
* If the noise is present only at start-up the chances are your belt is loose.
* If the noise is present after "start-up" (clutch engaged) then there are four possibilities:

1. Belt is not tight enough (or improper type).
2. Electric Clutch Pulley bearing is going out.
3. Bearing on tensioning/idler pulley is going out.
4. Compressor is knackered (or about to be).


Start with the belt(s) and let us know.
 
belts were replaced by dealership, i believe they are tight enough. The noise starts as soon as i push ac button and stays at a steady noise level for about a minute then gets WORSE. Air stays super cold the whole time. thanks everyone for the help
 
belts were replaced by dealership, i believe they are tight enough. The noise starts as soon as i push ac button and stays at a steady noise level for about a minute then gets WORSE. Air stays super cold the whole time. thanks everyone for the help
Howdy! from that, I would say probably the bearing in the idler pulley, or the compressor. Try the old stethascope trick to track it down. One's $40, the other is $400+. John
 
Spray some windex on the belt while it's running and the compressor is engaged and see if the noise changes on stops. That ought to clue you in a little more on whether it's the belt tightness or type or if it is something unrelated to the belt.
 
tried the windex and it did not change the sound, had my fingers crossed. I think I will ask the dealership to evac and reload with some lubricant first.


I recommend you eliminate the simple stuff first.

I know you just had your belts replaced...but that doesn't mean they are necessarily "Toyota/Mitsuboshi" belts. It wouldn't be the first time a dealer put aftermarket belts on a Toyota vehicle. I'd check that first.

Next, see if they are tight (push down on them and see how much deflection they have...anything over a 1/4"-3/8" is probably too much).

The idler/tensioning pulley bearing would be my next stop. If all these things show to be good, THEN consider taking it to the dealer for diagnosis.
 
Back
Top Bottom