- Vehicle Model
- 60 Series
Mostly everything except the t-handle top. $100 plus shipping.
SOLD ABQ,NM:FJ62 Transmission Shifter Parts
- Thread starter BurntToast
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Just needing the hole filler with the round hole for the t-handle . Mines broken. if yours is intact and you’d consider selling just that for $25 plus shipping in bubble wrap I’m definitely interested.
S
still available?
- Thread starter
- #4
Sorry forgot to mark as sold. Mine was also looking rough, so I bought parts to go this route instead
I wanted to share one of the little projects I completed on my wife's FJ62 while we're working on it. The standard automatic shifter has the funky plastic gates that seem to break. Toyota doesn't make them anymore.
Looks pretty ghetto. I don't like the plastic gates, so I'll try another familiar 80s solution - the brush gate. I bought a pair of XJS Jaguar Part #CAC2864 brush gates.
I drilled out the plastic welds for the slide plate to gain access to where I wanted to epoxy the gates. I had to remove some bottom material on the slide plate for it to lay down right once...
Looks pretty ghetto. I don't like the plastic gates, so I'll try another familiar 80s solution - the brush gate. I bought a pair of XJS Jaguar Part #CAC2864 brush gates.
I drilled out the plastic welds for the slide plate to gain access to where I wanted to epoxy the gates. I had to remove some bottom material on the slide plate for it to lay down right once...
